Shipping Tires from Aliaga to New Orleans via Ocean Freight

For moisture-sensitive automotive parts, choose inner sealed pouches around each component, then place them in Sturdy cartons with sufficient cushioning. Seal all seams with filament tape and clearly mark cartons “Protect from Moisture”. For export or long-duration transit, evaluate adding moisture absorbers inside master cartons and, if needed, inside the shipping container.

You may ship car tires with boxed car parts, but They should be physically separated and properly secured. Most carriers recommend palletizing boxed auto components and then stacking or racking car tires so they do not press against or rub cartons. Avoid placing heavy loose vehicle tires on top of fragile or moisture-sensitive auto components, as this can cause crushing or punctures during transit.

Fluid-filled automotive parts such as fuel system components, shock absorbers, or oil coolers can require special handling notes, depending on the type and quantity of fluid. You should review whether the product is classified as dangerous goods under IMDG and IATA regulations and include the appropriate safety data sheets (SDS), UN numbers, and packing group information if applicable. Even when not regulated as hazardous, clearly note “Contains Fluids – Keep Upright” on packaging and shipping documents to guide carriers.

High-value auto components such as engines, transmissions, ECUs, and safety modules are typically shipped with enhanced transit insurance. Carrier default liability Is often limited and may not cover the full replacement cost of specialized auto parts. Most brokers recommend insuring based on replacement value, documenting serial numbers and condition at pickup, and retaining invoices and packing lists so any claim for loss, impact damage, or moisture-related failure is processed efficiently.

To reduce damage in mixed auto parts pallet loads, arrange the heaviest metal components at the bottom, with lighter boxes and vehicle tires above. Use Corner boards, banding and film wrap to stabilize the load and prevent shifting. Keep moisture-sensitive auto components toward the center of the pallet, away from potential leaks or condensation on trailer walls, and prominently mark any fragile or orientation-sensitive cartons so handlers can respect correct handling procedures.

When shipping auto parts via ocean freight, it’s important to ensure that the parts are properly packaged to prevent damage during transit. Consider using moisture-resistant packaging to protect against humidity during the journey, and ensure that all items are secured to avoid shifting in containers.

Shipping auto parts from Turkey to the United States requires compliance with U.S. Customs and Border Protection regulations. Importers must provide appropriate documentation, including a bill of lading, commercial invoice, and any necessary permits or certifications specific to automotive parts, in addition to adhering to safety and environmental standards set by U.S. authorities.

Yes, an account is required. We walk you through onboarding to customize your experience and give you full access to the SAMMIE visibility platform.

Yes, we are fully licensed, bonded, and compliant with U.S. and international freight regulations as a Freight Forwarder, with credentials including Freight Forwarder & NVOCC License 019344, USDOT 3458744, MC-1128283, FMC Bond 91385, and C-TPAT Certification 24009050.

Yes, our platform uses AI to match documents, verify charges, and identify anomalies such as duplicate invoices, unmatched line items, or missing customs paperwork.