Shipping Automotives from Altamira to Port Klang via Ocean Freight

For moisture-sensitive Auto parts, Use inner poly bags with desiccant around each component, then place them in reinforced packaging with sufficient cushioning. Seal all seams with filament tape and clearly mark cartons “Protect from Moisture”. For export or long-duration transit, Consider adding humidity control packs inside master cartons and, if needed, inside the shipping container.

You Can ship Tires with boxed automotive parts, but they must be physically separated and properly secured. Most carriers recommend palletizing boxed auto components and then stacking or racking Tires so they do not press against or rub cartons. Avoid placing heavy loose car tires on top of fragile or moisture-sensitive vehicle parts, as this can cause crushing or punctures during transit.

Fluid-filled Auto parts such as fuel system components, shock absorbers, or oil coolers May require dangerous goods documentation, depending on the type and quantity of fluid. Exporters should review whether the product is classified as dangerous goods under IMDG and IATA regulations and Provide the appropriate safety data sheets (SDS), UN numbers, and packing group information if applicable. Even when not regulated as hazardous, clearly mark “Contains Fluids – Keep Upright” on packaging and shipping documents to guide carriers.

High-value Car parts such as engines, transmissions, ECUs, and safety modules Are best shipped with declared value coverage. Carrier default liability tends to be limited and may not cover the full replacement cost of specialized auto parts. Most brokers recommend insuring based on replacement value, documenting serial numbers and condition at pickup, and retaining invoices and packing lists so any claim for loss, impact damage, or moisture-related failure Can be processed efficiently.

To reduce damage in mixed Automotive pallet loads, Place the heaviest metal components at the bottom, with lighter boxes and car tires above. Use angle boards, banding and film wrap to stabilize the load and prevent shifting. Keep moisture-sensitive auto components toward the center of the pallet, away from potential leaks or condensation on trailer walls, and Clearly label any fragile or orientation-sensitive cartons so handlers will follow correct handling procedures.

The documentation required typically includes a commercial invoice, packing list, bill of lading, and any necessary certificates of origin or compliance with Malaysian import regulations.

Yes, auto parts should be properly packaged to prevent damage during transit, and any hazardous materials must be labeled according to international shipping regulations. Additionally, it is important to ensure that the cargo is compliant with both Mexican export and Malaysian import regulations to avoid delays.

SAMMIE’s Document Intelligence can auto-tag and organize bills of lading, customs forms, and invoices so you no longer need to hunt through folders or inboxes.

You can find this information by visit the “Meet the people and values behind DNA Supply Chain Solutions” section linked from the SAMMIE page.

Our founder believes the best work happens quietly when everything runs smoothly and no one’s watching, and he applies that mindset to logistics and to life.