Shipping Automotives from Antwerp to Rotterdam via Ground Freight

For moisture-sensitive automotive parts, select inner Moisture-barrier bags around each component, then place them in reinforced packaging with sufficient cushioning. Seal all seams with filament tape and clearly mark cartons “Keep Dry”. For export or long-duration transit, evaluate adding moisture absorbers inside master cartons and, if needed, inside the shipping container.

You may ship vehicle tires with boxed Auto parts, but they must be physically separated and properly secured. Most carriers recommend palletizing boxed Vehicle components and then stacking or racking car tires so they do not press against or rub cartons. Avoid placing heavy loose vehicle tires on top of fragile or moisture-sensitive vehicle parts, as this can cause crushing or punctures during transit.

Fluid-filled automotive parts such as fuel system components, shock absorbers, or oil coolers often require Hazardous materials declarations, depending on the type and quantity of fluid. Exporters should review whether the product is classified as dangerous goods under DOT and IATA regulations and include the appropriate safety data sheets (SDS), UN numbers, and packing group information if applicable. Even when not regulated as hazardous, clearly note “Contains Fluids – Keep Upright” on packaging and shipping documents to guide carriers.

High-value auto components such as engines, transmissions, ECUs, and safety modules should be shipped with Full-value cargo insurance. Carrier default liability tends to be limited and may not cover the full replacement cost of specialized auto parts. We recommend insuring based on replacement value, documenting serial numbers and condition at pickup, and retaining invoices and packing lists so any claim for loss, impact damage, or moisture-related failure is processed efficiently.

To reduce damage in mixed auto parts pallet loads, position the heaviest metal components at the bottom, with lighter boxes and Tires above. Use angle boards, banding and film wrap to stabilize the load and prevent shifting. Keep moisture-sensitive Car parts toward the center of the pallet, away from potential leaks or condensation on trailer walls, and prominently mark any fragile or orientation-sensitive cartons so handlers can respect correct handling procedures.

When shipping auto parts, it is important to ensure that the items are securely packaged to prevent damage during transit. Additionally, the load should be carefully balanced and secured within the transport vehicle to comply with safety regulations on the 78 km ground route.

Yes, when transporting auto parts from Antwerp to Rotterdam, it is necessary to comply with EU regulations regarding the transportation of goods. This includes ensuring that all items are properly documented for customs, even though there are typically minimal customs barriers between these two countries.

SAMMIE serves as a smart platform built with AI and powered by clean, structured data that provides real-time tracking, proactive insights, and full control from port to delivery.

SAMMIE’s Smart Route Planning feature uses AI to hunt for the best carrier, lane, and timing in real time, optimizing for cost, speed, and reliability.

The platform helps project-based ocean freight teams by allows teams to quickly and efficiently update their customers regarding project-based ocean freight shipments and provides the tools needed to deliver the customer service their clients expect.