Shipping Automotive Parts from Antwerp to Vancouver via Ocean Freight

For moisture-sensitive Auto parts, Use inner Moisture-barrier bags around each component, then place them in double-wall boxes with sufficient cushioning. Seal all seams with filament tape and clearly mark cartons “Dry Storage Only”. For export or long-duration transit, assess adding Desiccant packs inside master cartons and, if needed, inside the shipping container.

You Can ship Tires with boxed Auto parts, but it is best that they are physically separated and properly secured. Most carriers recommend palletizing boxed car parts and then stacking or racking vehicle tires so they do not press against or rub cartons. Avoid placing heavy loose Tires on top of fragile or moisture-sensitive auto components, as this can cause crushing or punctures during transit.

Fluid-filled Auto parts such as fuel system components, shock absorbers, or oil coolers May require Hazardous materials declarations, depending on the type and quantity of fluid. Shippers should review whether the product is classified as dangerous goods under relevant transport regulations and prepare the appropriate safety data sheets (SDS), UN numbers, and packing group information if applicable. Even when not regulated as hazardous, clearly Indicate “Contains Fluids – Keep Upright” on packaging and shipping documents to guide carriers.

High-value Car parts such as engines, transmissions, ECUs, and safety modules Are best shipped with Full-value cargo insurance. Carrier default liability is usually limited and may not cover the full replacement cost of specialized auto parts. Freight experts recommend insuring based on replacement value, documenting serial numbers and condition at pickup, and retaining invoices and packing lists so any claim for loss, impact damage, or moisture-related failure will be processed efficiently.

To reduce damage in mixed Automotive pallet loads, Place the heaviest metal components at the bottom, with lighter boxes and Tires above. Use edge protectors, banding and film wrap to stabilize the load and prevent shifting. Keep moisture-sensitive vehicle parts toward the center of the pallet, away from potential leaks or condensation on trailer walls, and visibly tag any fragile or orientation-sensitive cartons so handlers Can follow correct handling procedures.

When shipping auto parts, it is important to ensure that the items are securely packed to prevent damage during transit. Components should be cushioned and protected against moisture, as ocean freight can expose them to humid conditions. Additionally, the packaging should comply with international shipping standards to facilitate inspections.

The required documentation typically includes a commercial invoice, packing list, bill of lading, and any necessary certificates of origin. It is also essential to comply with Canadian import regulations, which may require additional documentation such as an import permit for certain automotive parts.

Our ETAs are AI-powered and based on real data, congestion, and vessel telemetry, whereas other forwarders often rely on static estimates copied from carrier schedules.

Customers describe SAMMIE’s data as extremely accurate and reliable, especially compared to the inaccurate or outdated data they used before adopting the platform.

Yes, you do. We walk you through onboarding to customize your experience and give you full access to the SAMMIE visibility platform.