Shipping Auto Components from Antwerp to Xiamen via Ocean Freight

For moisture-sensitive Auto parts, choose inner sealed pouches around each component, then place them in Sturdy cartons with sufficient cushioning. Seal all seams with Water-resistant tape and clearly mark cartons “Keep Dry”. For export or long-duration transit, evaluate adding Desiccant packs inside master cartons and, if needed, inside the shipping container.

You Can ship car tires with boxed car parts, but They should be physically separated and properly secured. We recommend palletizing boxed Vehicle components and then stacking or racking car tires so they do not press against or rub cartons. Avoid placing heavy loose Tires on top of fragile or moisture-sensitive vehicle parts, as this can cause crushing or punctures during transit.

Fluid-filled Auto parts such as fuel system components, shock absorbers, or oil coolers can require special handling notes, depending on the type and quantity of fluid. You should Check whether the product is classified as dangerous goods under DOT and IATA regulations and include the appropriate safety data sheets (SDS), UN numbers, and packing group information if applicable. Even when not regulated as hazardous, clearly Indicate “Contains Fluids – Keep Upright” on packaging and shipping documents to guide carriers.

High-value Car parts such as engines, transmissions, ECUs, and safety modules are typically shipped with enhanced transit insurance. Carrier default liability Is often limited and may not cover the full replacement cost of specialized Automotive parts. We recommend insuring based on replacement value, documenting serial numbers and condition at pickup, and retaining invoices and packing lists so any claim for loss, impact damage, or moisture-related failure is processed efficiently.

To reduce damage in mixed Automotive pallet loads, arrange the heaviest metal components at the bottom, with lighter boxes and vehicle tires above. Use Corner boards, Stretch wrap plus strapping to stabilize the load and prevent shifting. Keep moisture-sensitive Car parts toward the center of the pallet, away from potential leaks or condensation on trailer walls, and prominently mark any fragile or orientation-sensitive cartons so handlers Can follow correct handling procedures.

Auto parts should be packaged securely to prevent damage during ocean freight. It is essential to ensure that parts are properly labeled and documented to facilitate customs clearance in both Antwerp and Xiamen. Additionally, specific handling instructions may be required for sensitive components to avoid corrosion or damage due to moisture during transit.

Shipping auto parts from Belgium to China requires compliance with both countries' regulations. This includes obtaining necessary export and import licenses, ensuring adherence to customs documentation requirements, and complying with safety and quality standards set by Chinese authorities for automotive parts. Proper classification of the parts according to the Harmonized System is also essential for customs processing.

“DNA Expert Date” uses AI models with lane history, port trends, and weather data to deliver dynamic, accurate delivery timeframes.

Yes, we handle both full container loads (FCL) and less-than-container loads (LCL) shipments.

We provide ground transportation including full truckload (FTL), less-than-truckload (LTL), and drayage services, with U.S. and Mexico cross-border coverage, scalable capacity, GPS tracking, and digital documentation.