Shipping Car Tires from Atlanta to Shenzhen via Ocean Freight

For moisture-sensitive automotive parts, select inner sealed pouches around each component, then place them in reinforced packaging with sufficient cushioning. Seal all seams with filament tape and clearly mark cartons “Protect from Moisture”. For export or long-duration transit, evaluate adding Desiccant packs inside master cartons and, if needed, inside the shipping container.

You may ship vehicle tires with boxed car parts, but they must be physically separated and properly secured. Most carriers recommend palletizing boxed auto components and then stacking or racking car tires so they do not press against or rub cartons. Avoid placing heavy loose Tires on top of fragile or moisture-sensitive vehicle parts, as this can cause crushing or punctures during transit.

Fluid-filled automotive parts such as fuel system components, shock absorbers, or oil coolers often require special handling notes, depending on the type and quantity of fluid. Exporters should review whether the product is classified as dangerous goods under IMDG and IATA regulations and include the appropriate safety data sheets (SDS), UN numbers, and packing group information if applicable. Even when not regulated as hazardous, clearly Indicate “Contains Fluids – Keep Upright” on packaging and shipping documents to guide carriers.

High-value auto components such as engines, transmissions, ECUs, and safety modules should be shipped with enhanced transit insurance. Carrier default liability tends to be limited and may not cover the full replacement cost of specialized auto parts. Most brokers recommend insuring based on replacement value, documenting serial numbers and condition at pickup, and retaining invoices and packing lists so any claim for loss, impact damage, or moisture-related failure is processed efficiently.

To reduce damage in mixed auto parts pallet loads, position the heaviest metal components at the bottom, with lighter boxes and vehicle tires above. Use angle boards, banding and film wrap to stabilize the load and prevent shifting. Keep moisture-sensitive auto components toward the center of the pallet, away from potential leaks or condensation on trailer walls, and prominently mark any fragile or orientation-sensitive cartons so handlers Can follow correct handling procedures.

Shipping auto parts from Atlanta to Shenzhen requires several documents, including a commercial invoice, packing list, bill of lading, and any necessary export licenses. Additionally, compliance with China's customs regulations is essential, which may include product-specific certifications.

When shipping auto parts via ocean freight from Atlanta to Shenzhen, it is important to ensure proper packaging to prevent damage during transit. Parts should be secured to avoid shifting, and moisture-resistant materials may be necessary due to the ocean environment. Additionally, regulations regarding hazardous materials must be considered if any auto parts fall under that category.

The Actionable Shipment Intelligence feature surface trends, spot delays, and enable you to run exportable reports, while the system learns from every shipment to improve the next one.

The platform improves your client service by allowing you to quickly and efficiently update your customers on their shipments and providing the visibility and data needed to meet the customer service your clients expect.

To explore additional services, you can visit the section to explore DNA Supply Chain’s complete logistics services.