Shipping Tires from Bangkok to Portland via Ocean Freight

For moisture-sensitive car parts, Use inner sealed pouches around each component, then place them in double-wall boxes with sufficient cushioning. Seal all seams with Water-resistant tape and clearly mark cartons “Keep Dry”. For export or long-duration transit, Consider adding moisture absorbers inside master cartons and, if needed, inside the shipping container.

You are allowed to ship Tires with boxed car parts, but it is best that they are physically separated and properly secured. We recommend palletizing boxed Vehicle components and then stacking or racking Tires so they do not press against or rub cartons. Avoid placing heavy loose vehicle tires on top of fragile or moisture-sensitive Automotive parts, as this can cause crushing or punctures during transit.

Fluid-filled vehicle parts such as fuel system components, shock absorbers, or oil coolers May require special handling notes, depending on the type and quantity of fluid. Shippers should Check whether the product is classified as dangerous goods under DOT and IATA regulations and Provide the appropriate safety data sheets (SDS), UN numbers, and packing group information if applicable. Even when not regulated as hazardous, clearly note “Contains Fluids – Keep Upright” on packaging and shipping documents to guide carriers.

High-value vehicle components such as engines, transmissions, ECUs, and safety modules Are best shipped with enhanced transit insurance. Carrier default liability is usually limited and may not cover the full replacement cost of specialized Automotive parts. We recommend insuring based on replacement value, documenting serial numbers and condition at pickup, and retaining invoices and packing lists so any claim for loss, impact damage, or moisture-related failure Can be processed efficiently.

To reduce damage in mixed vehicle components pallet loads, Place the heaviest metal components at the bottom, with lighter boxes and vehicle tires above. Use edge protectors, Stretch wrap plus strapping to stabilize the load and prevent shifting. Keep moisture-sensitive Car parts toward the center of the pallet, away from potential leaks or condensation on trailer walls, and Clearly label any fragile or orientation-sensitive cartons so handlers can respect correct handling procedures.

When shipping auto parts from Bangkok to Portland, it is important to ensure that the parts are securely packed to prevent damage during transit. Additionally, due to the nature of auto parts, special attention should be given to items that may be susceptible to rust or corrosion, necessitating protective coatings or moisture-absorbing materials.

Shipping auto parts from Thailand to the United States requires compliance with U.S. customs regulations, including proper documentation such as a bill of lading, commercial invoice, and any necessary export permits. Importers must also ensure that the auto parts meet U.S. safety and emissions standards, which may involve additional certifications or inspections.

Shippers can submit details via our Request a Quote form or talk to our team through the Contact Us page on our website.

Our operations are fully compliant with CBP, TSA, IATA, and NMFTA standards to ensure secure, lawful, and efficient cross-border operations.

Yes, one example is CE North America, where we built a custom EDI feed that pushes real-time shipment updates, documentation, and exception alerts directly into their ERP, eliminating dozens of manual tasks and improving cross-department visibility.