Shipping Vehicle Components from Bogota to Long Beach via Ocean Freight

For moisture-sensitive automotive parts, Use inner sealed pouches around each component, then place them in reinforced packaging with sufficient cushioning. Seal all seams with Water-resistant tape and clearly mark cartons “Keep Dry”. For export or long-duration transit, Consider adding humidity control packs inside master cartons and, if needed, inside the shipping container.

You may ship Tires with boxed car parts, but they must be physically separated and properly secured. We recommend palletizing boxed Vehicle components and then stacking or racking Tires so they do not press against or rub cartons. Avoid placing heavy loose car tires on top of fragile or moisture-sensitive vehicle parts, as this can cause crushing or punctures during transit.

Fluid-filled automotive parts such as fuel system components, shock absorbers, or oil coolers May require special handling notes, depending on the type and quantity of fluid. Exporters should Check whether the product is classified as dangerous goods under DOT and IATA regulations and Provide the appropriate safety data sheets (SDS), UN numbers, and packing group information if applicable. Even when not regulated as hazardous, clearly mark “Contains Fluids – Keep Upright” on packaging and shipping documents to guide carriers.

High-value auto components such as engines, transmissions, ECUs, and safety modules Are best shipped with enhanced transit insurance. Carrier default liability tends to be limited and may not cover the full replacement cost of specialized Automotive parts. We recommend insuring based on replacement value, documenting serial numbers and condition at pickup, and retaining invoices and packing lists so any claim for loss, impact damage, or moisture-related failure Can be processed efficiently.

To reduce damage in mixed auto parts pallet loads, Place the heaviest metal components at the bottom, with lighter boxes and vehicle tires above. Use angle boards, Stretch wrap plus strapping to stabilize the load and prevent shifting. Keep moisture-sensitive Car parts toward the center of the pallet, away from potential leaks or condensation on trailer walls, and Clearly label any fragile or orientation-sensitive cartons so handlers will follow correct handling procedures.

Required documentation includes a commercial invoice, packing list, bill of lading, and any necessary import/export permits. Additionally, a certificate of origin may be needed to comply with trade regulations between Colombia and the United States.

Yes, auto parts should be securely packaged to prevent damage during transit. It is important to consider moisture protection, especially during ocean transport, as humidity can affect the integrity of automotive components. Proper labeling and adherence to weight restrictions are also crucial for safe handling.

Prospective clients can take the “One Test Run Challenge” by giving us a single shipment, which we use to demonstrate what visibility, reliability, and real partnership feel like, with a dedicated page available to get started.

Our SAMMIE platform is provided with every ocean, air, land, and customs service at no extra cost.

DNA uses SAMMIE’s AI-driven rate and route optimization to recommend optimal carriers and lanes based on current conditions and prices.