Shipping Auto Components from Bogota to Los Angeles via Ocean Freight

For moisture-sensitive Auto parts, select inner poly bags with desiccant around each component, then place them in double-wall boxes with sufficient cushioning. Seal all seams with Water-resistant tape and clearly mark cartons “Keep Dry”. For export or long-duration transit, Consider adding Desiccant packs inside master cartons and, if needed, inside the shipping container.

You Can ship vehicle tires with boxed automotive parts, but it is best that they are physically separated and properly secured. We recommend palletizing boxed Vehicle components and then stacking or racking Tires so they do not press against or rub cartons. Avoid placing heavy loose Tires on top of fragile or moisture-sensitive auto components, as this can cause crushing or punctures during transit.

Fluid-filled Auto parts such as fuel system components, shock absorbers, or oil coolers often require dangerous goods documentation, depending on the type and quantity of fluid. Shippers should Check whether the product is classified as dangerous goods under DOT and IATA regulations and Provide the appropriate safety data sheets (SDS), UN numbers, and packing group information if applicable. Even when not regulated as hazardous, clearly Indicate “Contains Fluids – Keep Upright” on packaging and shipping documents to guide carriers.

High-value Car parts such as engines, transmissions, ECUs, and safety modules should be shipped with declared value coverage. Carrier default liability is usually limited and may not cover the full replacement cost of specialized Automotive parts. We recommend insuring based on replacement value, documenting serial numbers and condition at pickup, and retaining invoices and packing lists so any claim for loss, impact damage, or moisture-related failure Can be processed efficiently.

To reduce damage in mixed Automotive pallet loads, position the heaviest metal components at the bottom, with lighter boxes and car tires above. Use edge protectors, Stretch wrap plus strapping to stabilize the load and prevent shifting. Keep moisture-sensitive Car parts toward the center of the pallet, away from potential leaks or condensation on trailer walls, and Clearly label any fragile or orientation-sensitive cartons so handlers Can follow correct handling procedures.

Shipping auto parts from Bogota to Los Angeles requires specific documentation, including a commercial invoice, packing list, bill of lading, and certificate of origin. Additionally, compliance with U.S. customs regulations, such as ensuring all parts meet safety and environmental standards, is essential.

Yes, seasonal considerations may affect ocean freight from Bogota to Los Angeles. The peak shipping season typically occurs from late spring to early fall, which can lead to increased congestion at ports and potential delays. Additionally, weather patterns, such as hurricanes in the Atlantic, may impact shipping routes and schedules.

You can start by take the DNA “One Test Run Challenge” with a single shipment so we can demonstrate our visibility, reliability, and partnership-focused approach.

We offer ocean freight (FCL and LCL), air freight, ground transportation (domestic and cross-border trucking), customs brokerage, and warehousing & distribution, all supported by our SAMMIE visibility platform and dedicated Client Success Officers.

We provide secure, strategically located warehousing for scalable storage and just-in-time fulfillment, with real-time inventory control and integrated distribution powered by SAMMIE’s insight and our responsive Client Success Officers.