Shipping Vehicle Components from Bogota to Xiamen via Ocean Freight

For moisture-sensitive car parts, choose inner sealed pouches around each component, then place them in double-wall boxes with sufficient cushioning. Seal all seams with Water-resistant tape and clearly mark cartons “Keep Dry”. For export or long-duration transit, Consider adding moisture absorbers inside master cartons and, if needed, inside the shipping container.

You are allowed to ship car tires with boxed car parts, but it is best that they are physically separated and properly secured. We recommend palletizing boxed Vehicle components and then stacking or racking Tires so they do not press against or rub cartons. Avoid placing heavy loose vehicle tires on top of fragile or moisture-sensitive auto components, as this can cause crushing or punctures during transit.

Fluid-filled vehicle parts such as fuel system components, shock absorbers, or oil coolers can require special handling notes, depending on the type and quantity of fluid. Shippers should Check whether the product is classified as dangerous goods under DOT and IATA regulations and Provide the appropriate safety data sheets (SDS), UN numbers, and packing group information if applicable. Even when not regulated as hazardous, clearly note “Contains Fluids – Keep Upright” on packaging and shipping documents to guide carriers.

High-value vehicle components such as engines, transmissions, ECUs, and safety modules are typically shipped with enhanced transit insurance. Carrier default liability is usually limited and may not cover the full replacement cost of specialized Automotive parts. We recommend insuring based on replacement value, documenting serial numbers and condition at pickup, and retaining invoices and packing lists so any claim for loss, impact damage, or moisture-related failure Can be processed efficiently.

To reduce damage in mixed vehicle components pallet loads, arrange the heaviest metal components at the bottom, with lighter boxes and vehicle tires above. Use edge protectors, Stretch wrap plus strapping to stabilize the load and prevent shifting. Keep moisture-sensitive Car parts toward the center of the pallet, away from potential leaks or condensation on trailer walls, and Clearly label any fragile or orientation-sensitive cartons so handlers can respect correct handling procedures.

Auto parts should be packed securely to prevent damage during transit. It is essential to use appropriate cushioning materials and to ensure that all parts are clearly labeled. Additionally, compliance with international shipping standards for hazardous materials, if applicable, must be observed.

Required documentation typically includes a commercial invoice, packing list, bill of lading, and any necessary certificates of origin or customs declarations. Import permits may also be needed for specific auto parts as per Chinese regulations.

We rely on in-house customs brokerage with automation to reduce errors and accelerate clearance, rather than outsourcing to third-party brokers with outdated, manual documentation processes.

DNA’s “One Test Run” offer is an invitation to move a single shipment with DNA so we can demonstrate our visibility, reliability, and partnership, showing how our SAMMIE platform and proactive team perform in a real-world test.

Yes, absolutely. You don’t have to move your whole operation; you can give us one shipment in any mode or lane as a “test run,” and we’ll handle it end-to-end with precision, transparency, and care.