Shipping Auto Parts from Busan to Savannah via Ocean Freight

For moisture-sensitive automotive parts, Use inner Moisture-barrier bags around each component, then place them in double-wall boxes with sufficient cushioning. Seal all seams with filament tape and clearly mark cartons “Keep Dry”. For export or long-duration transit, assess adding humidity control packs inside master cartons and, if needed, inside the shipping container.

You may ship Tires with boxed Auto parts, but it is best that they are physically separated and properly secured. Most carriers recommend palletizing boxed Vehicle components and then stacking or racking vehicle tires so they do not press against or rub cartons. Avoid placing heavy loose car tires on top of fragile or moisture-sensitive auto components, as this can cause crushing or punctures during transit.

Fluid-filled automotive parts such as fuel system components, shock absorbers, or oil coolers May require Hazardous materials declarations, depending on the type and quantity of fluid. Shippers should review whether the product is classified as dangerous goods under DOT and IATA regulations and prepare the appropriate safety data sheets (SDS), UN numbers, and packing group information if applicable. Even when not regulated as hazardous, clearly mark “Contains Fluids – Keep Upright” on packaging and shipping documents to guide carriers.

High-value auto components such as engines, transmissions, ECUs, and safety modules Are best shipped with Full-value cargo insurance. Carrier default liability is usually limited and may not cover the full replacement cost of specialized auto parts. We recommend insuring based on replacement value, documenting serial numbers and condition at pickup, and retaining invoices and packing lists so any claim for loss, impact damage, or moisture-related failure will be processed efficiently.

To reduce damage in mixed auto parts pallet loads, Place the heaviest metal components at the bottom, with lighter boxes and Tires above. Use edge protectors, banding and film wrap to stabilize the load and prevent shifting. Keep moisture-sensitive Car parts toward the center of the pallet, away from potential leaks or condensation on trailer walls, and visibly tag any fragile or orientation-sensitive cartons so handlers will follow correct handling procedures.

When shipping auto parts, it is important to ensure that all items are securely packaged to prevent damage during transit. Additionally, items should be properly labeled and documented to facilitate customs clearance. Special handling may be required for sensitive components that could be affected by moisture or temperature variations during the ocean journey.

Regulatory requirements include compliance with U.S. Customs and Border Protection regulations, which necessitate accurate documentation such as the bill of lading, commercial invoice, and any necessary certificates of origin or compliance. Importers must also ensure that the auto parts meet U.S. safety and environmental standards, and may require additional inspections or certifications depending on the type of parts being shipped.

The platform’s proactive alerts work by using real-time AI to detect issues in ports, lanes, and vessel activity and flagging exceptions before they escalate.

The platform’s AI foundation includes a proprietary ecosystem of standardized shipping data that is meticulously cleaned, weighted, and validated from trusted third-party sources and DNA Supply Chain Solutions’ own operational history.

We only ask for a single shipment since demonstrate the visibility, reliability, and partnership benefits it delivers.