Shipping Automotives from Cai Mep to Cartagena via Ocean Freight

For moisture-sensitive Auto parts, select inner poly bags with desiccant around each component, then place them in double-wall boxes with sufficient cushioning. Seal all seams with strong packing tape and clearly mark cartons “Protect from Moisture”. For export or long-duration transit, evaluate adding moisture absorbers inside master cartons and, if needed, inside the shipping container.

You Can ship vehicle tires with boxed automotive parts, but it is best that they are physically separated and properly secured. Logistics providers commonly recommend palletizing boxed auto components and then stacking or racking car tires so they do not press against or rub cartons. Avoid placing heavy loose vehicle tires on top of fragile or moisture-sensitive Automotive parts, as this can cause crushing or punctures during transit.

Fluid-filled Auto parts such as fuel system components, shock absorbers, or oil coolers often require dangerous goods documentation, depending on the type and quantity of fluid. Shippers should verify whether the product is classified as dangerous goods under IMDG and IATA regulations and include the appropriate safety data sheets (SDS), UN numbers, and packing group information if applicable. Even when not regulated as hazardous, clearly note “Contains Fluids – Keep Upright” on packaging and shipping documents to guide carriers.

High-value Car parts such as engines, transmissions, ECUs, and safety modules should be shipped with declared value coverage. Carrier default liability is usually limited and may not cover the full replacement cost of specialized vehicle parts. Most brokers recommend insuring based on replacement value, documenting serial numbers and condition at pickup, and retaining invoices and packing lists so any claim for loss, impact damage, or moisture-related failure is processed efficiently.

To reduce damage in mixed Automotive pallet loads, position the heaviest metal components at the bottom, with lighter boxes and car tires above. Use edge protectors, shrink wrap and bands to stabilize the load and prevent shifting. Keep moisture-sensitive auto components toward the center of the pallet, away from potential leaks or condensation on trailer walls, and prominently mark any fragile or orientation-sensitive cartons so handlers can respect correct handling procedures.

The documentation typically required includes a commercial invoice, packing list, bill of lading, and any necessary certificates of origin or quality assurance specific to automotive parts. Additionally, customs declarations must comply with both Vietnamese and Colombian regulations.

Yes, auto parts should be properly packaged to prevent damage during transit, and it is essential to ensure that they are secured to prevent shifting within the container. Special attention should be given to sensitive components that may be affected by moisture or temperature changes during ocean transport.

Yes, we provide global shipment support for hardware, electronics, and high-value IT assets with secure handling.

SAMMIE includes AI-powered ETAs, “hot” shipment flagging, instant delay alerts, live map tracking for every container globally, and centralized, searchable storage for BOLs, invoices, and customs forms.

We provide domestic and cross-border trucking for cross-country hauls and final-mile delivery, with hands-on support from dedicated Client Success Officers and proactive alerts from SAMMIE to solve problems before you spot them.