Shipping Auto Components from Cai Mep to Laem Chabang via Ocean Freight

For moisture-sensitive car parts, choose inner Moisture-barrier bags around each component, then place them in Sturdy cartons with sufficient cushioning. Seal all seams with Water-resistant tape and clearly mark cartons “Protect from Moisture”. For export or long-duration transit, evaluate adding Desiccant packs inside master cartons and, if needed, inside the shipping container.

You are allowed to ship car tires with boxed Auto parts, but They should be physically separated and properly secured. We recommend palletizing boxed auto components and then stacking or racking car tires so they do not press against or rub cartons. Avoid placing heavy loose Tires on top of fragile or moisture-sensitive auto components, as this can cause crushing or punctures during transit.

Fluid-filled vehicle parts such as fuel system components, shock absorbers, or oil coolers can require Hazardous materials declarations, depending on the type and quantity of fluid. You should Check whether the product is classified as dangerous goods under IMDG and IATA regulations and include the appropriate safety data sheets (SDS), UN numbers, and packing group information if applicable. Even when not regulated as hazardous, clearly Indicate “Contains Fluids – Keep Upright” on packaging and shipping documents to guide carriers.

High-value vehicle components such as engines, transmissions, ECUs, and safety modules are typically shipped with Full-value cargo insurance. Carrier default liability Is often limited and may not cover the full replacement cost of specialized Automotive parts. Most brokers recommend insuring based on replacement value, documenting serial numbers and condition at pickup, and retaining invoices and packing lists so any claim for loss, impact damage, or moisture-related failure is processed efficiently.

To reduce damage in mixed vehicle components pallet loads, arrange the heaviest metal components at the bottom, with lighter boxes and Tires above. Use Corner boards, Stretch wrap plus strapping to stabilize the load and prevent shifting. Keep moisture-sensitive auto components toward the center of the pallet, away from potential leaks or condensation on trailer walls, and prominently mark any fragile or orientation-sensitive cartons so handlers Can follow correct handling procedures.

Shipments of auto parts from Cai Mep to Laem Chabang require a commercial invoice, packing list, bill of lading, and any necessary certificates of origin or conformity. Additionally, customs declarations must be completed according to both Vietnamese and Thai regulations.

Yes, during the monsoon season, typically from May to October, there may be increased risks of rough seas and delays. It is advisable to monitor weather conditions and prepare for potential impacts on ocean freight operations during this period.

Our customs brokerage includes tariff classification and valuation as part of our in-house expertise.

Our network includes partnered facilities in key logistics hubs, including locations near important ports for strategic storage and fulfillment.

We encourage you to take the DNA “One Test Run Challenge” with a single shipment so we can demonstrate our visibility, reliability, and partnership-focused approach.