Shipping Auto Parts from Cai Mep to Paranagua via Ocean Freight

For moisture-sensitive Auto parts, Use inner sealed pouches around each component, then place them in reinforced packaging with sufficient cushioning. Seal all seams with filament tape and clearly mark cartons “Dry Storage Only”. For export or long-duration transit, assess adding humidity control packs inside master cartons and, if needed, inside the shipping container.

You Can ship Tires with boxed car parts, but they must be physically separated and properly secured. Most carriers recommend palletizing boxed car parts and then stacking or racking vehicle tires so they do not press against or rub cartons. Avoid placing heavy loose car tires on top of fragile or moisture-sensitive Automotive parts, as this can cause crushing or punctures during transit.

Fluid-filled Auto parts such as fuel system components, shock absorbers, or oil coolers May require special handling notes, depending on the type and quantity of fluid. Exporters should review whether the product is classified as dangerous goods under relevant transport regulations and prepare the appropriate safety data sheets (SDS), UN numbers, and packing group information if applicable. Even when not regulated as hazardous, clearly mark “Contains Fluids – Keep Upright” on packaging and shipping documents to guide carriers.

High-value Car parts such as engines, transmissions, ECUs, and safety modules Are best shipped with enhanced transit insurance. Carrier default liability tends to be limited and may not cover the full replacement cost of specialized auto parts. Freight experts recommend insuring based on replacement value, documenting serial numbers and condition at pickup, and retaining invoices and packing lists so any claim for loss, impact damage, or moisture-related failure will be processed efficiently.

To reduce damage in mixed Automotive pallet loads, Place the heaviest metal components at the bottom, with lighter boxes and vehicle tires above. Use angle boards, banding and film wrap to stabilize the load and prevent shifting. Keep moisture-sensitive vehicle parts toward the center of the pallet, away from potential leaks or condensation on trailer walls, and visibly tag any fragile or orientation-sensitive cartons so handlers will follow correct handling procedures.

The required documentation includes a commercial invoice, packing list, bill of lading, and any necessary certificates of origin or compliance with Brazilian regulations for automotive products.

Yes, auto parts should be properly packaged and secured to prevent damage during transit. Additionally, considering the potential for humidity and temperature variations during ocean transport, moisture-resistant packaging is recommended to protect sensitive components.

Yes, we provide predictive ETAs and real-time updates, supported by SAMMIE’s AI models and tracking capabilities.

Yes, we support FTL, LTL, and drayage services for a range of shipment sizes and needs.

Yes, we offer FDA, USDA, and multi-agency support to help you navigate compliance.