Shipping Tires from Chicago to Atlanta via Ocean Freight

For moisture-sensitive automotive parts, Use inner sealed pouches around each component, then place them in Sturdy cartons with sufficient cushioning. Seal all seams with Water-resistant tape and clearly mark cartons “Keep Dry”. For export or long-duration transit, Consider adding moisture absorbers inside master cartons and, if needed, inside the shipping container.

You may ship Tires with boxed car parts, but They should be physically separated and properly secured. We recommend palletizing boxed Vehicle components and then stacking or racking Tires so they do not press against or rub cartons. Avoid placing heavy loose vehicle tires on top of fragile or moisture-sensitive Automotive parts, as this can cause crushing or punctures during transit.

Fluid-filled automotive parts such as fuel system components, shock absorbers, or oil coolers May require special handling notes, depending on the type and quantity of fluid. You should Check whether the product is classified as dangerous goods under DOT and IATA regulations and Provide the appropriate safety data sheets (SDS), UN numbers, and packing group information if applicable. Even when not regulated as hazardous, clearly note “Contains Fluids – Keep Upright” on packaging and shipping documents to guide carriers.

High-value auto components such as engines, transmissions, ECUs, and safety modules Are best shipped with enhanced transit insurance. Carrier default liability Is often limited and may not cover the full replacement cost of specialized Automotive parts. We recommend insuring based on replacement value, documenting serial numbers and condition at pickup, and retaining invoices and packing lists so any claim for loss, impact damage, or moisture-related failure Can be processed efficiently.

To reduce damage in mixed auto parts pallet loads, Place the heaviest metal components at the bottom, with lighter boxes and vehicle tires above. Use Corner boards, Stretch wrap plus strapping to stabilize the load and prevent shifting. Keep moisture-sensitive Car parts toward the center of the pallet, away from potential leaks or condensation on trailer walls, and Clearly label any fragile or orientation-sensitive cartons so handlers can respect correct handling procedures.

When shipping auto parts via ocean freight from Chicago to Atlanta, it is important to ensure that the parts are properly packaged to prevent damage during transit. Components should be secured to prevent movement and must be resistant to moisture and corrosion, as ocean transport can expose them to humid conditions. Additionally, specific auto parts may require temperature control depending on their materials.

Shipping auto parts within the United States does not typically require customs documentation, but shippers should prepare a bill of lading, commercial invoice, and any additional paperwork that may be required for specific automotive parts. It is essential to ensure that all documentation accurately reflects the contents and value of the shipment to comply with regulatory requirements.

The platform improves internal visibility by providing immediate visibility across departments and to your clients, which supports better alignment between purchasing, logistics, and finance.

The platform’s document tools will auto-tag and organize bills of lading, customs forms, and invoices so you no longer need to hunt through folders or inboxes.

To learn about the people and values, visit the “Meet the people and values behind DNA Supply Chain Solutions” section linked from the SAMMIE page.