Shipping Car Parts from Chicago to Columbus via Ground Freight

For moisture-sensitive automotive parts, select inner sealed pouches around each component, then place them in double-wall boxes with sufficient cushioning. Seal all seams with Water-resistant tape and clearly mark cartons “Keep Dry”. For export or long-duration transit, assess adding Desiccant packs inside master cartons and, if needed, inside the shipping container.

You may ship vehicle tires with boxed car parts, but it is best that they are physically separated and properly secured. We recommend palletizing boxed Vehicle components and then stacking or racking vehicle tires so they do not press against or rub cartons. Avoid placing heavy loose Tires on top of fragile or moisture-sensitive vehicle parts, as this can cause crushing or punctures during transit.

Fluid-filled automotive parts such as fuel system components, shock absorbers, or oil coolers often require special handling notes, depending on the type and quantity of fluid. Shippers should Check whether the product is classified as dangerous goods under DOT and IATA regulations and prepare the appropriate safety data sheets (SDS), UN numbers, and packing group information if applicable. Even when not regulated as hazardous, clearly Indicate “Contains Fluids – Keep Upright” on packaging and shipping documents to guide carriers.

High-value auto components such as engines, transmissions, ECUs, and safety modules should be shipped with enhanced transit insurance. Carrier default liability is usually limited and may not cover the full replacement cost of specialized Automotive parts. We recommend insuring based on replacement value, documenting serial numbers and condition at pickup, and retaining invoices and packing lists so any claim for loss, impact damage, or moisture-related failure will be processed efficiently.

To reduce damage in mixed auto parts pallet loads, position the heaviest metal components at the bottom, with lighter boxes and vehicle tires above. Use edge protectors, Stretch wrap plus strapping to stabilize the load and prevent shifting. Keep moisture-sensitive Car parts toward the center of the pallet, away from potential leaks or condensation on trailer walls, and visibly tag any fragile or orientation-sensitive cartons so handlers Can follow correct handling procedures.

Yes, when shipping auto parts via ground from Chicago to Columbus, it is important to ensure that all parts are properly secured to prevent damage during transit. Additionally, sensitive components may require special cushioning or temperature control, depending on the materials used in their construction.

For shipments between Chicago and Columbus, regulatory requirements are minimal since both locations are within the United States. However, it is essential to comply with any local state regulations regarding transportation and vehicle emissions that may apply to the auto parts being shipped.

Yes, DNA offers live tracking with GPS and satellite-based updates that keep you informed from port to door.

Yes, DNA offers predictive ETAs and real-time updates, supported by SAMMIE’s AI models and tracking capabilities.

Yes, DNA handles FTL, LTL, and drayage services for a range of shipment sizes and needs.