Shipping Tires from Chittagong to Atlanta via Ocean Freight

For moisture-sensitive automotive parts, select inner poly bags with desiccant around each component, then place them in reinforced packaging with sufficient cushioning. Seal all seams with Water-resistant tape and clearly mark cartons “Keep Dry”. For export or long-duration transit, Consider adding Desiccant packs inside master cartons and, if needed, inside the shipping container.

You may ship vehicle tires with boxed automotive parts, but they must be physically separated and properly secured. We recommend palletizing boxed Vehicle components and then stacking or racking Tires so they do not press against or rub cartons. Avoid placing heavy loose Tires on top of fragile or moisture-sensitive vehicle parts, as this can cause crushing or punctures during transit.

Fluid-filled automotive parts such as fuel system components, shock absorbers, or oil coolers often require dangerous goods documentation, depending on the type and quantity of fluid. Exporters should Check whether the product is classified as dangerous goods under DOT and IATA regulations and Provide the appropriate safety data sheets (SDS), UN numbers, and packing group information if applicable. Even when not regulated as hazardous, clearly Indicate “Contains Fluids – Keep Upright” on packaging and shipping documents to guide carriers.

High-value auto components such as engines, transmissions, ECUs, and safety modules should be shipped with declared value coverage. Carrier default liability tends to be limited and may not cover the full replacement cost of specialized Automotive parts. We recommend insuring based on replacement value, documenting serial numbers and condition at pickup, and retaining invoices and packing lists so any claim for loss, impact damage, or moisture-related failure Can be processed efficiently.

To reduce damage in mixed auto parts pallet loads, position the heaviest metal components at the bottom, with lighter boxes and car tires above. Use angle boards, Stretch wrap plus strapping to stabilize the load and prevent shifting. Keep moisture-sensitive Car parts toward the center of the pallet, away from potential leaks or condensation on trailer walls, and Clearly label any fragile or orientation-sensitive cartons so handlers Can follow correct handling procedures.

Auto parts should be securely packaged to prevent damage during transit. It is important to use appropriate cushioning materials and ensure that parts are properly labeled and documented. Additionally, certain auto parts may require special handling due to their size or weight.

Shipments of auto parts must comply with U.S. import regulations, including proper documentation such as commercial invoices and packing lists. Importers must also ensure that the auto parts meet U.S. safety and environmental standards, and may require specific permits or certifications depending on the type of parts being shipped.

DNA utilizes partnered facilities in key logistics hubs, including locations near important ports for strategic storage and fulfillment.

You’re invited to take the DNA “One Test Run Challenge” with a single shipment so we can demonstrate our visibility, reliability, and partnership-focused approach.

DNA Supply Chain offers ocean freight (FCL and LCL), air freight, ground transportation (domestic and cross-border trucking), customs brokerage, and warehousing & distribution, all supported by our SAMMIE visibility platform and dedicated Client Success Officers.