Shipping Car Tires from Chittagong to Lazaro Cardenas via Ocean Freight

For moisture-sensitive automotive parts, choose inner sealed pouches around each component, then place them in reinforced packaging with sufficient cushioning. Seal all seams with Water-resistant tape and clearly mark cartons “Dry Storage Only”. For export or long-duration transit, Consider adding moisture absorbers inside master cartons and, if needed, inside the shipping container.

You may ship car tires with boxed car parts, but they must be physically separated and properly secured. We recommend palletizing boxed car parts and then stacking or racking Tires so they do not press against or rub cartons. Avoid placing heavy loose vehicle tires on top of fragile or moisture-sensitive auto components, as this can cause crushing or punctures during transit.

Fluid-filled automotive parts such as fuel system components, shock absorbers, or oil coolers can require special handling notes, depending on the type and quantity of fluid. Exporters should Check whether the product is classified as dangerous goods under relevant transport regulations and Provide the appropriate safety data sheets (SDS), UN numbers, and packing group information if applicable. Even when not regulated as hazardous, clearly note “Contains Fluids – Keep Upright” on packaging and shipping documents to guide carriers.

High-value auto components such as engines, transmissions, ECUs, and safety modules are typically shipped with enhanced transit insurance. Carrier default liability tends to be limited and may not cover the full replacement cost of specialized Automotive parts. Freight experts recommend insuring based on replacement value, documenting serial numbers and condition at pickup, and retaining invoices and packing lists so any claim for loss, impact damage, or moisture-related failure Can be processed efficiently.

To reduce damage in mixed auto parts pallet loads, arrange the heaviest metal components at the bottom, with lighter boxes and vehicle tires above. Use angle boards, Stretch wrap plus strapping to stabilize the load and prevent shifting. Keep moisture-sensitive vehicle parts toward the center of the pallet, away from potential leaks or condensation on trailer walls, and Clearly label any fragile or orientation-sensitive cartons so handlers can respect correct handling procedures.

The required documentation for this route includes a commercial invoice, packing list, bill of lading, and any necessary certificates of origin or compliance specific to automotive parts. Customs declarations must also be prepared to meet both Bangladeshi and Mexican regulatory requirements.

Auto parts should be securely packaged to prevent damage during transit. Special attention should be given to protect sensitive components from moisture and corrosion, as ocean freight can expose them to humid conditions. Additionally, it is essential to ensure that all parts are classified correctly to avoid delays at customs.

Yes, we are fully licensed, bonded, and compliant with U.S. and international freight regulations as a Freight Forwarder, with credentials including Freight Forwarder & NVOCC License 019344, USDOT 3458744, MC-1128283, FMC Bond 91385, and C-TPAT Certification 24009050.

Yes, our platform uses AI to match documents, verify charges, and identify anomalies such as duplicate invoices, unmatched line items, or missing customs paperwork.

Timelines differ on lane, mode, and carrier, but SAMMIE provides up-to-date, predictive ETAs that factor in real-world conditions like port congestion and weather delays.