Shipping Auto Parts from Chittagong to Teoloyucan via Ocean Freight

For moisture-sensitive Auto parts, choose inner sealed pouches around each component, then place them in Sturdy cartons with sufficient cushioning. Seal all seams with Water-resistant tape and clearly mark cartons “Keep Dry”. For export or long-duration transit, Consider adding moisture absorbers inside master cartons and, if needed, inside the shipping container.

You Can ship car tires with boxed car parts, but They should be physically separated and properly secured. We recommend palletizing boxed Vehicle components and then stacking or racking Tires so they do not press against or rub cartons. Avoid placing heavy loose vehicle tires on top of fragile or moisture-sensitive vehicle parts, as this can cause crushing or punctures during transit.

Fluid-filled Auto parts such as fuel system components, shock absorbers, or oil coolers can require special handling notes, depending on the type and quantity of fluid. You should Check whether the product is classified as dangerous goods under DOT and IATA regulations and Provide the appropriate safety data sheets (SDS), UN numbers, and packing group information if applicable. Even when not regulated as hazardous, clearly note “Contains Fluids – Keep Upright” on packaging and shipping documents to guide carriers.

High-value Car parts such as engines, transmissions, ECUs, and safety modules are typically shipped with enhanced transit insurance. Carrier default liability Is often limited and may not cover the full replacement cost of specialized Automotive parts. We recommend insuring based on replacement value, documenting serial numbers and condition at pickup, and retaining invoices and packing lists so any claim for loss, impact damage, or moisture-related failure Can be processed efficiently.

To reduce damage in mixed Automotive pallet loads, arrange the heaviest metal components at the bottom, with lighter boxes and vehicle tires above. Use Corner boards, Stretch wrap plus strapping to stabilize the load and prevent shifting. Keep moisture-sensitive Car parts toward the center of the pallet, away from potential leaks or condensation on trailer walls, and Clearly label any fragile or orientation-sensitive cartons so handlers can respect correct handling procedures.

When shipping auto parts via ocean freight, it is crucial to ensure that the parts are securely packaged to prevent damage during transit. Due to the long distance of approximately 15,192 km, proper cushioning and protection against moisture are essential. Additionally, consideration should be given to the weight and size of the auto parts to comply with shipping regulations.

The required documentation for customs clearance includes a commercial invoice, packing list, bill of lading, and any specific certificates required for automotive parts. Export documentation from Bangladesh must also comply with Mexican import regulations, which may include specific import permits or certifications for automotive components.

Most platforms only show carrier data, while SAMMIE is built on ecosystem data from third-party sources and DNA’s proprietary history, enabling predictive ETAs, intelligent alerts, and advanced automation powered by clean, validated data.

We offer international shipping by ocean (FCL and LCL), air (standard and expedited), and domestic or cross-border ground freight (FTL, LTL, and intermodal).

Absolutely, you can access all documents—bills of lading, invoices, customs forms, and arrival notices—in SAMMIE’s centralized, searchable document hub.