Shipping Car Parts from Colombo to Genoa via Ocean Freight

For moisture-sensitive automotive parts, Use inner sealed pouches around each component, then place them in reinforced packaging with sufficient cushioning. Seal all seams with Water-resistant tape and clearly mark cartons “Keep Dry”. For export or long-duration transit, Consider adding Desiccant packs inside master cartons and, if needed, inside the shipping container.

You may ship Tires with boxed car parts, but they must be physically separated and properly secured. We recommend palletizing boxed Vehicle components and then stacking or racking Tires so they do not press against or rub cartons. Avoid placing heavy loose Tires on top of fragile or moisture-sensitive vehicle parts, as this can cause crushing or punctures during transit.

Fluid-filled automotive parts such as fuel system components, shock absorbers, or oil coolers May require special handling notes, depending on the type and quantity of fluid. Exporters should Check whether the product is classified as dangerous goods under DOT and IATA regulations and Provide the appropriate safety data sheets (SDS), UN numbers, and packing group information if applicable. Even when not regulated as hazardous, clearly Indicate “Contains Fluids – Keep Upright” on packaging and shipping documents to guide carriers.

High-value auto components such as engines, transmissions, ECUs, and safety modules Are best shipped with enhanced transit insurance. Carrier default liability tends to be limited and may not cover the full replacement cost of specialized Automotive parts. We recommend insuring based on replacement value, documenting serial numbers and condition at pickup, and retaining invoices and packing lists so any claim for loss, impact damage, or moisture-related failure Can be processed efficiently.

To reduce damage in mixed auto parts pallet loads, Place the heaviest metal components at the bottom, with lighter boxes and vehicle tires above. Use angle boards, Stretch wrap plus strapping to stabilize the load and prevent shifting. Keep moisture-sensitive Car parts toward the center of the pallet, away from potential leaks or condensation on trailer walls, and Clearly label any fragile or orientation-sensitive cartons so handlers Can follow correct handling procedures.

When shipping auto parts via ocean freight from Colombo to Genoa, it's crucial to ensure that the parts are securely packaged to prevent damage during transit. Additionally, specific handling may be required for sensitive components, such as electronics or hydraulic parts, which may need climate-controlled conditions during shipping.

Shipping auto parts from Colombo to Genoa requires several key documents for customs clearance, including a commercial invoice, packing list, bill of lading, and potentially a certificate of origin. It is also important to comply with any regulatory requirements specific to automotive parts imposed by Italian customs authorities.

The platform improves internal visibility by providing immediate visibility across departments and to your clients, which supports better alignment between purchasing, logistics, and finance.

The platform’s document tools will auto-tag and organize bills of lading, customs forms, and invoices so you no longer need to hunt through folders or inboxes.

To learn about the people and values, visit the “Meet the people and values behind DNA Supply Chain Solutions” section linked from the SAMMIE page.