Shipping Auto Parts from Colon to Colombo via Ocean Freight

For moisture-sensitive Auto parts, Use inner Moisture-barrier bags around each component, then place them in reinforced packaging with sufficient cushioning. Seal all seams with Water-resistant tape and clearly mark cartons “Keep Dry”. For export or long-duration transit, assess adding Desiccant packs inside master cartons and, if needed, inside the shipping container.

You Can ship Tires with boxed Auto parts, but they must be physically separated and properly secured. We recommend palletizing boxed Vehicle components and then stacking or racking vehicle tires so they do not press against or rub cartons. Avoid placing heavy loose Tires on top of fragile or moisture-sensitive vehicle parts, as this can cause crushing or punctures during transit.

Fluid-filled Auto parts such as fuel system components, shock absorbers, or oil coolers May require Hazardous materials declarations, depending on the type and quantity of fluid. Exporters should Check whether the product is classified as dangerous goods under DOT and IATA regulations and prepare the appropriate safety data sheets (SDS), UN numbers, and packing group information if applicable. Even when not regulated as hazardous, clearly Indicate “Contains Fluids – Keep Upright” on packaging and shipping documents to guide carriers.

High-value Car parts such as engines, transmissions, ECUs, and safety modules Are best shipped with Full-value cargo insurance. Carrier default liability tends to be limited and may not cover the full replacement cost of specialized Automotive parts. We recommend insuring based on replacement value, documenting serial numbers and condition at pickup, and retaining invoices and packing lists so any claim for loss, impact damage, or moisture-related failure will be processed efficiently.

To reduce damage in mixed Automotive pallet loads, Place the heaviest metal components at the bottom, with lighter boxes and Tires above. Use angle boards, Stretch wrap plus strapping to stabilize the load and prevent shifting. Keep moisture-sensitive Car parts toward the center of the pallet, away from potential leaks or condensation on trailer walls, and visibly tag any fragile or orientation-sensitive cartons so handlers Can follow correct handling procedures.

Auto parts should be securely packaged to prevent damage during ocean transit. It is important to ensure that all parts are properly labeled and categorized to facilitate customs clearance and handling at both the Colon and Colombo ports. Additionally, specific parts may require special handling due to weight or fragility.

Required documentation includes a commercial invoice, packing list, and bill of lading. Additionally, a certificate of origin may be necessary to comply with regulatory requirements. Import permits specific to automotive parts may also be required by Sri Lankan authorities.

The “One Test Run Challenge” is an invitation to give DNA Supply Chain Solutions one test shipment so we can prove what visibility, reliability, and real partnership feel like with just a single shipment.

The name comes from a conversation between our founder and his daughter, Ameerah, who suggested merging their names—David ‘N’ Ameerah—to create DNA, reflecting strong bonds, shared values, and trust.

SAMMIE is Shipping Analytical Maritime Management for Import and Exports, a full exception-management system and total supply chain management platform powered by live carrier data, independent port tracking, a proprietary AI rules engine, and human verification.