Shipping Automotives from Da Nang to Vancouver via Ocean Freight

For moisture-sensitive automotive parts, select inner poly bags with desiccant around each component, then place them in double-wall boxes with sufficient cushioning. Seal all seams with filament tape and clearly mark cartons “Keep Dry”. For export or long-duration transit, evaluate adding Desiccant packs inside master cartons and, if needed, inside the shipping container.

You may ship vehicle tires with boxed automotive parts, but it is best that they are physically separated and properly secured. Most carriers recommend palletizing boxed Vehicle components and then stacking or racking car tires so they do not press against or rub cartons. Avoid placing heavy loose Tires on top of fragile or moisture-sensitive Automotive parts, as this can cause crushing or punctures during transit.

Fluid-filled automotive parts such as fuel system components, shock absorbers, or oil coolers often require dangerous goods documentation, depending on the type and quantity of fluid. Shippers should review whether the product is classified as dangerous goods under DOT and IATA regulations and include the appropriate safety data sheets (SDS), UN numbers, and packing group information if applicable. Even when not regulated as hazardous, clearly Indicate “Contains Fluids – Keep Upright” on packaging and shipping documents to guide carriers.

High-value auto components such as engines, transmissions, ECUs, and safety modules should be shipped with declared value coverage. Carrier default liability is usually limited and may not cover the full replacement cost of specialized auto parts. We recommend insuring based on replacement value, documenting serial numbers and condition at pickup, and retaining invoices and packing lists so any claim for loss, impact damage, or moisture-related failure is processed efficiently.

To reduce damage in mixed auto parts pallet loads, position the heaviest metal components at the bottom, with lighter boxes and car tires above. Use edge protectors, banding and film wrap to stabilize the load and prevent shifting. Keep moisture-sensitive Car parts toward the center of the pallet, away from potential leaks or condensation on trailer walls, and prominently mark any fragile or orientation-sensitive cartons so handlers Can follow correct handling procedures.

Auto parts should be securely packaged to prevent damage during ocean transit. It is important to ensure that all parts are properly labeled and comply with international shipping standards to facilitate customs clearance.

Required documentation typically includes a commercial invoice, packing list, bill of lading, and any specific import permits or certificates related to automotive parts, which may vary based on the type of parts being shipped.

Our SAMMIE platform is provided with every ocean, air, land, and customs service at no extra cost.

DNA uses SAMMIE’s AI-driven rate and route optimization to recommend optimal carriers and lanes based on current conditions and prices.

Yes, DNA includes consolidation and customs pre-clearance to help move your air cargo quickly and compliantly.