Shipping Auto Components from Dalian to Altamira via Ocean Freight

For moisture-sensitive Auto parts, Use inner sealed pouches around each component, then place them in reinforced packaging with sufficient cushioning. Seal all seams with Water-resistant tape and clearly mark cartons “Keep Dry”. For export or long-duration transit, Consider adding humidity control packs inside master cartons and, if needed, inside the shipping container.

You Can ship Tires with boxed car parts, but they must be physically separated and properly secured. We recommend palletizing boxed Vehicle components and then stacking or racking Tires so they do not press against or rub cartons. Avoid placing heavy loose car tires on top of fragile or moisture-sensitive Automotive parts, as this can cause crushing or punctures during transit.

Fluid-filled Auto parts such as fuel system components, shock absorbers, or oil coolers May require special handling notes, depending on the type and quantity of fluid. Exporters should Check whether the product is classified as dangerous goods under DOT and IATA regulations and Provide the appropriate safety data sheets (SDS), UN numbers, and packing group information if applicable. Even when not regulated as hazardous, clearly mark “Contains Fluids – Keep Upright” on packaging and shipping documents to guide carriers.

High-value Car parts such as engines, transmissions, ECUs, and safety modules Are best shipped with enhanced transit insurance. Carrier default liability tends to be limited and may not cover the full replacement cost of specialized Automotive parts. We recommend insuring based on replacement value, documenting serial numbers and condition at pickup, and retaining invoices and packing lists so any claim for loss, impact damage, or moisture-related failure Can be processed efficiently.

To reduce damage in mixed Automotive pallet loads, Place the heaviest metal components at the bottom, with lighter boxes and vehicle tires above. Use angle boards, Stretch wrap plus strapping to stabilize the load and prevent shifting. Keep moisture-sensitive Car parts toward the center of the pallet, away from potential leaks or condensation on trailer walls, and Clearly label any fragile or orientation-sensitive cartons so handlers will follow correct handling procedures.

The necessary documentation includes a commercial invoice, packing list, bill of lading, and any required certificates of origin or compliance with Mexican regulations. Additional customs documentation may be required depending on the specific type of auto parts being shipped.

Yes, shipping during the typhoon season, typically from May to October, may affect ocean freight routes and handling procedures from Dalian. Additionally, peak shipping seasons around major holidays can lead to increased congestion at ports, which may impact logistics planning.

SAMMIE helps reduce tracking time by providing real-time updates, proactive alerts, and a single dashboard, which has led customers to reduce tracking time from 25–30 hours per week to 2–3 hours per week and achieve about 50% less time spent tracking shipments.

SAMMIE impacts cross-department visibility by providing immediate visibility across departments and to your clients, which supports better alignment between purchasing, logistics, and finance.

SAMMIE’s Document Intelligence can auto-tag and organize bills of lading, customs forms, and invoices so you no longer need to hunt through folders or inboxes.