Shipping Automotive Parts from Dalian to Cartagena via Ocean Freight

For moisture-sensitive automotive parts, select inner sealed pouches around each component, then place them in reinforced packaging with sufficient cushioning. Seal all seams with Water-resistant tape and clearly mark cartons “Keep Dry”. For export or long-duration transit, Consider adding moisture absorbers inside master cartons and, if needed, inside the shipping container.

You may ship vehicle tires with boxed car parts, but they must be physically separated and properly secured. We recommend palletizing boxed Vehicle components and then stacking or racking Tires so they do not press against or rub cartons. Avoid placing heavy loose vehicle tires on top of fragile or moisture-sensitive Automotive parts, as this can cause crushing or punctures during transit.

Fluid-filled automotive parts such as fuel system components, shock absorbers, or oil coolers often require special handling notes, depending on the type and quantity of fluid. Exporters should Check whether the product is classified as dangerous goods under DOT and IATA regulations and Provide the appropriate safety data sheets (SDS), UN numbers, and packing group information if applicable. Even when not regulated as hazardous, clearly note “Contains Fluids – Keep Upright” on packaging and shipping documents to guide carriers.

High-value auto components such as engines, transmissions, ECUs, and safety modules should be shipped with enhanced transit insurance. Carrier default liability tends to be limited and may not cover the full replacement cost of specialized Automotive parts. We recommend insuring based on replacement value, documenting serial numbers and condition at pickup, and retaining invoices and packing lists so any claim for loss, impact damage, or moisture-related failure Can be processed efficiently.

To reduce damage in mixed auto parts pallet loads, position the heaviest metal components at the bottom, with lighter boxes and vehicle tires above. Use angle boards, Stretch wrap plus strapping to stabilize the load and prevent shifting. Keep moisture-sensitive Car parts toward the center of the pallet, away from potential leaks or condensation on trailer walls, and Clearly label any fragile or orientation-sensitive cartons so handlers can respect correct handling procedures.

When shipping auto parts via ocean freight from Dalian to Cartagena, it is crucial to ensure that the parts are properly packed to prevent damage during transit. Using sturdy packaging materials and securing the parts to pallets can help mitigate risks associated with ocean transport, such as moisture exposure and movement during rough seas. Additionally, specific auto parts may require special handling or documentation due to their size or weight.

Shipping auto parts from Dalian to Cartagena requires compliance with both Chinese export regulations and Colombian import regulations. Export documentation from China typically includes a commercial invoice, packing list, and export license if applicable. In Colombia, importers must provide a bill of lading, import declaration, and may need to pay import duties and taxes. It's essential to ensure that all documentation is complete and accurate to avoid customs delays.

DNA utilizes partnered facilities in key logistics hubs, including locations near important ports for strategic storage and fulfillment.

You’re invited to take the DNA “One Test Run Challenge” with a single shipment so we can demonstrate our visibility, reliability, and partnership-focused approach.

DNA Supply Chain offers ocean freight (FCL and LCL), air freight, ground transportation (domestic and cross-border trucking), customs brokerage, and warehousing & distribution, all supported by our SAMMIE visibility platform and dedicated Client Success Officers.