Shipping Car Parts from Dallas-Fort Worth to Calgary via Ground Freight

For moisture-sensitive Auto parts, select inner poly bags with desiccant around each component, then place them in reinforced packaging with sufficient cushioning. Seal all seams with filament tape and clearly mark cartons “Protect from Moisture”. For export or long-duration transit, evaluate adding moisture absorbers inside master cartons and, if needed, inside the shipping container.

You Can ship vehicle tires with boxed automotive parts, but they must be physically separated and properly secured. Most carriers recommend palletizing boxed auto components and then stacking or racking car tires so they do not press against or rub cartons. Avoid placing heavy loose vehicle tires on top of fragile or moisture-sensitive auto components, as this can cause crushing or punctures during transit.

Fluid-filled Auto parts such as fuel system components, shock absorbers, or oil coolers often require dangerous goods documentation, depending on the type and quantity of fluid. Exporters should review whether the product is classified as dangerous goods under IMDG and IATA regulations and include the appropriate safety data sheets (SDS), UN numbers, and packing group information if applicable. Even when not regulated as hazardous, clearly note “Contains Fluids – Keep Upright” on packaging and shipping documents to guide carriers.

High-value Car parts such as engines, transmissions, ECUs, and safety modules should be shipped with declared value coverage. Carrier default liability tends to be limited and may not cover the full replacement cost of specialized auto parts. Most brokers recommend insuring based on replacement value, documenting serial numbers and condition at pickup, and retaining invoices and packing lists so any claim for loss, impact damage, or moisture-related failure is processed efficiently.

To reduce damage in mixed Automotive pallet loads, position the heaviest metal components at the bottom, with lighter boxes and car tires above. Use angle boards, banding and film wrap to stabilize the load and prevent shifting. Keep moisture-sensitive auto components toward the center of the pallet, away from potential leaks or condensation on trailer walls, and prominently mark any fragile or orientation-sensitive cartons so handlers can respect correct handling procedures.

Shipments from the United States to Canada require a commercial invoice, a bill of lading, and may need specific customs declarations and permits depending on the type of auto parts being shipped. It is essential to ensure all documentation is accurate to facilitate smooth customs clearance.

Seasonal weather conditions can impact road conditions along the route from Dallas-Fort Worth to Calgary, particularly during winter months when snow and ice may affect travel. It is advisable to monitor weather forecasts and road conditions to ensure safe transportation of auto parts.

Yes, we are fully licensed (FMC #019344), bonded, insured, and C-TPAT compliant, with a digital-first customs process that uses automation to reduce delays, cut risk, and ensure regulatory compliance.

Yes, you will have a dedicated Client Success Officer who oversees your freight, solves problems proactively, and keeps you informed throughout each shipment.

We say this because a single shipment is enough for shippers to experience our AI-powered visibility, proactive issue management, and partner-level support, and to see how we differ from larger, less responsive forwarders.