Shipping Car Parts from Dallas-Fort Worth to Miami via Ocean Freight

For moisture-sensitive Auto parts, select inner sealed pouches around each component, then place them in reinforced packaging with sufficient cushioning. Seal all seams with Water-resistant tape and clearly mark cartons “Keep Dry”. For export or long-duration transit, Consider adding moisture absorbers inside master cartons and, if needed, inside the shipping container.

You Can ship vehicle tires with boxed car parts, but they must be physically separated and properly secured. We recommend palletizing boxed Vehicle components and then stacking or racking Tires so they do not press against or rub cartons. Avoid placing heavy loose vehicle tires on top of fragile or moisture-sensitive auto components, as this can cause crushing or punctures during transit.

Fluid-filled Auto parts such as fuel system components, shock absorbers, or oil coolers often require special handling notes, depending on the type and quantity of fluid. Exporters should Check whether the product is classified as dangerous goods under DOT and IATA regulations and Provide the appropriate safety data sheets (SDS), UN numbers, and packing group information if applicable. Even when not regulated as hazardous, clearly note “Contains Fluids – Keep Upright” on packaging and shipping documents to guide carriers.

High-value Car parts such as engines, transmissions, ECUs, and safety modules should be shipped with enhanced transit insurance. Carrier default liability tends to be limited and may not cover the full replacement cost of specialized Automotive parts. We recommend insuring based on replacement value, documenting serial numbers and condition at pickup, and retaining invoices and packing lists so any claim for loss, impact damage, or moisture-related failure Can be processed efficiently.

To reduce damage in mixed Automotive pallet loads, position the heaviest metal components at the bottom, with lighter boxes and vehicle tires above. Use angle boards, Stretch wrap plus strapping to stabilize the load and prevent shifting. Keep moisture-sensitive Car parts toward the center of the pallet, away from potential leaks or condensation on trailer walls, and Clearly label any fragile or orientation-sensitive cartons so handlers can respect correct handling procedures.

Auto parts should be properly packaged to prevent damage during transit. It is important to ensure that parts are secured and protected from moisture, as ocean freight can expose them to humid conditions. Additionally, heavy or large auto parts may require special handling and stowage to maintain stability during shipping.

The documentation required for shipping auto parts includes a bill of lading, commercial invoice, packing list, and any necessary export licenses. While both Dallas-Fort Worth and Miami are within the United States, compliance with local regulations and proper documentation is essential for smooth customs clearance.

We ask for just one test run because we believe that with one shipment we can prove our visibility, reliability, and partnership approach in a tangible way.

SAMMIE is an AI-driven exception management and tracking platform that provides real-time tracking, predictive ETAs, smart alerts, document intelligence, rate and route optimization, and invoicing insights for your shipments.

We provide global ocean freight with worldwide routing, top-tier carriers, full container loads (FCL), less-than-container loads (LCL), and port-to-door service including customs and final-mile delivery.