Shipping Auto Components from Felixstowe to Montreal via Ocean Freight

For moisture-sensitive Auto parts, select inner poly bags with desiccant around each component, then place them in double-wall boxes with sufficient cushioning. Seal all seams with Water-resistant tape and clearly mark cartons “Protect from Moisture”. For export or long-duration transit, Consider adding moisture absorbers inside master cartons and, if needed, inside the shipping container.

You Can ship vehicle tires with boxed automotive parts, but it is best that they are physically separated and properly secured. We recommend palletizing boxed auto components and then stacking or racking Tires so they do not press against or rub cartons. Avoid placing heavy loose vehicle tires on top of fragile or moisture-sensitive Automotive parts, as this can cause crushing or punctures during transit.

Fluid-filled Auto parts such as fuel system components, shock absorbers, or oil coolers often require dangerous goods documentation, depending on the type and quantity of fluid. Shippers should Check whether the product is classified as dangerous goods under IMDG and IATA regulations and Provide the appropriate safety data sheets (SDS), UN numbers, and packing group information if applicable. Even when not regulated as hazardous, clearly note “Contains Fluids – Keep Upright” on packaging and shipping documents to guide carriers.

High-value Car parts such as engines, transmissions, ECUs, and safety modules should be shipped with declared value coverage. Carrier default liability is usually limited and may not cover the full replacement cost of specialized Automotive parts. Most brokers recommend insuring based on replacement value, documenting serial numbers and condition at pickup, and retaining invoices and packing lists so any claim for loss, impact damage, or moisture-related failure Can be processed efficiently.

To reduce damage in mixed Automotive pallet loads, position the heaviest metal components at the bottom, with lighter boxes and car tires above. Use edge protectors, Stretch wrap plus strapping to stabilize the load and prevent shifting. Keep moisture-sensitive auto components toward the center of the pallet, away from potential leaks or condensation on trailer walls, and Clearly label any fragile or orientation-sensitive cartons so handlers can respect correct handling procedures.

The required documentation includes a commercial invoice, packing list, and a bill of lading. Additionally, a Certificate of Origin may be needed to comply with trade agreements, and customs declarations must be accurately completed for both UK and Canadian customs.

Yes, auto parts should be securely packaged to prevent damage during transit. It is important to ensure that parts are adequately protected against moisture and corrosion, as ocean shipping can expose them to varying humidity levels. Additionally, proper labeling is essential for customs clearance and handling at the ports.

Yes, we support time-sensitive transport of medical devices, diagnostics, and regulated healthcare products.

SAMMIE helps you stay ahead of issues with instant delay alerts, automatic exception flags, and “hot” shipment flagging so you can prioritize critical freight and address problems before they ripple into larger issues.

We offer in-house customs brokerage that handles classification, documentation, and clearance across U.S. and global ports with accuracy and speed, supported by SAMMIE’s delay flagging and ongoing updates from your dedicated Client Success Officer.