Shipping Automotives from Felixstowe to New York via Ocean Freight

For moisture-sensitive car parts, Use inner poly bags with desiccant around each component, then place them in reinforced packaging with sufficient cushioning. Seal all seams with Water-resistant tape and clearly mark cartons “Keep Dry”. For export or long-duration transit, Consider adding humidity control packs inside master cartons and, if needed, inside the shipping container.

You are allowed to ship Tires with boxed automotive parts, but they must be physically separated and properly secured. We recommend palletizing boxed Vehicle components and then stacking or racking Tires so they do not press against or rub cartons. Avoid placing heavy loose car tires on top of fragile or moisture-sensitive auto components, as this can cause crushing or punctures during transit.

Fluid-filled vehicle parts such as fuel system components, shock absorbers, or oil coolers May require dangerous goods documentation, depending on the type and quantity of fluid. Exporters should Check whether the product is classified as dangerous goods under DOT and IATA regulations and Provide the appropriate safety data sheets (SDS), UN numbers, and packing group information if applicable. Even when not regulated as hazardous, clearly mark “Contains Fluids – Keep Upright” on packaging and shipping documents to guide carriers.

High-value vehicle components such as engines, transmissions, ECUs, and safety modules Are best shipped with declared value coverage. Carrier default liability tends to be limited and may not cover the full replacement cost of specialized Automotive parts. We recommend insuring based on replacement value, documenting serial numbers and condition at pickup, and retaining invoices and packing lists so any claim for loss, impact damage, or moisture-related failure Can be processed efficiently.

To reduce damage in mixed vehicle components pallet loads, Place the heaviest metal components at the bottom, with lighter boxes and car tires above. Use angle boards, Stretch wrap plus strapping to stabilize the load and prevent shifting. Keep moisture-sensitive Car parts toward the center of the pallet, away from potential leaks or condensation on trailer walls, and Clearly label any fragile or orientation-sensitive cartons so handlers will follow correct handling procedures.

Shipping auto parts from Felixstowe to New York requires proper documentation including a commercial invoice, packing list, and a bill of lading. Additionally, compliance with U.S. customs regulations, including any necessary import permits or certificates, must be ensured.

Yes, auto parts should be securely packaged to prevent damage during ocean transport. It's important to use appropriate dunnage and secure the cargo within containers to avoid shifting. Additionally, specific care should be taken for parts sensitive to moisture or temperature fluctuations.

Our system helps avoid surprises like a vessel’s status suddenly changing to a long delay by delivering platform-level visibility with real-world accuracy through combined data sources and human checks.

In practice, it means we serve people, not just packages, focusing on face-to-face communication, thoughtful support, and long-term trust rather than one-off transactions.

Shippers can join the “One Test Run Challenge” by giving us a single shipment, which we use to demonstrate what visibility, reliability, and real partnership feel like, with a dedicated page available to get started.