Shipping Auto Parts from Foshan to Denver via Ocean Freight

For moisture-sensitive car parts, Use inner poly bags with desiccant around each component, then place them in reinforced packaging with sufficient cushioning. Seal all seams with filament tape and clearly mark cartons “Protect from Moisture”. For export or long-duration transit, evaluate adding moisture absorbers inside master cartons and, if needed, inside the shipping container.

You are allowed to ship Tires with boxed automotive parts, but they must be physically separated and properly secured. Most carriers recommend palletizing boxed auto components and then stacking or racking car tires so they do not press against or rub cartons. Avoid placing heavy loose vehicle tires on top of fragile or moisture-sensitive Automotive parts, as this can cause crushing or punctures during transit.

Fluid-filled vehicle parts such as fuel system components, shock absorbers, or oil coolers May require dangerous goods documentation, depending on the type and quantity of fluid. Exporters should review whether the product is classified as dangerous goods under IMDG and IATA regulations and include the appropriate safety data sheets (SDS), UN numbers, and packing group information if applicable. Even when not regulated as hazardous, clearly note “Contains Fluids – Keep Upright” on packaging and shipping documents to guide carriers.

High-value vehicle components such as engines, transmissions, ECUs, and safety modules Are best shipped with declared value coverage. Carrier default liability tends to be limited and may not cover the full replacement cost of specialized auto parts. Most brokers recommend insuring based on replacement value, documenting serial numbers and condition at pickup, and retaining invoices and packing lists so any claim for loss, impact damage, or moisture-related failure is processed efficiently.

To reduce damage in mixed vehicle components pallet loads, Place the heaviest metal components at the bottom, with lighter boxes and car tires above. Use angle boards, banding and film wrap to stabilize the load and prevent shifting. Keep moisture-sensitive auto components toward the center of the pallet, away from potential leaks or condensation on trailer walls, and prominently mark any fragile or orientation-sensitive cartons so handlers can respect correct handling procedures.

Shipping auto parts from Foshan to Denver requires several key documents, including a commercial invoice, packing list, bill of lading, and any necessary export permits. Additionally, customs clearance in the United States will require compliance with regulations set by the U.S. Customs and Border Protection (CBP), including proper classification of the auto parts under the Harmonized Tariff Schedule and any applicable duties or taxes.

When shipping auto parts via ocean freight, it is essential to ensure that they are properly packaged to prevent damage during transit. Considerations include using sturdy packaging materials, securing parts to prevent movement, and ensuring that any sensitive or fragile components are adequately cushioned. Additionally, it is important to label all packages clearly for identification and compliance with international shipping regulations.

Our services include live tracking with GPS and satellite-based updates that keep you informed from port to door.

Our services include predictive ETAs and real-time updates, supported by SAMMIE’s AI models and tracking capabilities.

Our trucking services cover FTL, LTL, and drayage services for a range of shipment sizes and needs.