Shipping Auto Parts from Foshan to New York via Ocean Freight

For moisture-sensitive automotive parts, choose inner sealed pouches around each component, then place them in double-wall boxes with sufficient cushioning. Seal all seams with filament tape and clearly mark cartons “Protect from Moisture”. For export or long-duration transit, Consider adding humidity control packs inside master cartons and, if needed, inside the shipping container.

You may ship car tires with boxed car parts, but it is best that they are physically separated and properly secured. Most carriers recommend palletizing boxed auto components and then stacking or racking Tires so they do not press against or rub cartons. Avoid placing heavy loose car tires on top of fragile or moisture-sensitive Automotive parts, as this can cause crushing or punctures during transit.

Fluid-filled automotive parts such as fuel system components, shock absorbers, or oil coolers can require special handling notes, depending on the type and quantity of fluid. Shippers should review whether the product is classified as dangerous goods under IMDG and IATA regulations and Provide the appropriate safety data sheets (SDS), UN numbers, and packing group information if applicable. Even when not regulated as hazardous, clearly mark “Contains Fluids – Keep Upright” on packaging and shipping documents to guide carriers.

High-value auto components such as engines, transmissions, ECUs, and safety modules are typically shipped with enhanced transit insurance. Carrier default liability is usually limited and may not cover the full replacement cost of specialized auto parts. Most brokers recommend insuring based on replacement value, documenting serial numbers and condition at pickup, and retaining invoices and packing lists so any claim for loss, impact damage, or moisture-related failure Can be processed efficiently.

To reduce damage in mixed auto parts pallet loads, arrange the heaviest metal components at the bottom, with lighter boxes and vehicle tires above. Use edge protectors, banding and film wrap to stabilize the load and prevent shifting. Keep moisture-sensitive auto components toward the center of the pallet, away from potential leaks or condensation on trailer walls, and Clearly label any fragile or orientation-sensitive cartons so handlers will follow correct handling procedures.

The documentation typically required includes a bill of lading, commercial invoice, packing list, and any necessary certificates of origin or compliance with U.S. regulations.

Yes, shipments of auto parts must comply with U.S. Customs and Border Protection regulations, including potential import duties and adherence to safety and environmental standards set by agencies such as the Environmental Protection Agency (EPA) and the National Highway Traffic Safety Administration (NHTSA).

All customers get access to SAMMIE, where you can track each shipment in real time with predictive ETAs, milestone updates, and instant alerts in a single dashboard.

DNA works with U.S. Customs & Border Protection (CBP), the FDA, USDA, DOT, and other regulatory bodies, and we maintain active certifications including C-TPAT and FMC.

Yes, we do provide coverage for urgent cases, which are escalated and managed with after-hours monitoring when needed, especially for high-volume or time-critical shipments.