Shipping Tires from Haiphong to Long Beach via Ocean Freight

For moisture-sensitive Auto parts, choose inner sealed pouches around each component, then place them in double-wall boxes with sufficient cushioning. Seal all seams with Water-resistant tape and clearly mark cartons “Dry Storage Only”. For export or long-duration transit, Consider adding Desiccant packs inside master cartons and, if needed, inside the shipping container.

You Can ship car tires with boxed car parts, but it is best that they are physically separated and properly secured. We recommend palletizing boxed car parts and then stacking or racking Tires so they do not press against or rub cartons. Avoid placing heavy loose Tires on top of fragile or moisture-sensitive vehicle parts, as this can cause crushing or punctures during transit.

Fluid-filled Auto parts such as fuel system components, shock absorbers, or oil coolers can require special handling notes, depending on the type and quantity of fluid. Shippers should Check whether the product is classified as dangerous goods under relevant transport regulations and Provide the appropriate safety data sheets (SDS), UN numbers, and packing group information if applicable. Even when not regulated as hazardous, clearly Indicate “Contains Fluids – Keep Upright” on packaging and shipping documents to guide carriers.

High-value Car parts such as engines, transmissions, ECUs, and safety modules are typically shipped with enhanced transit insurance. Carrier default liability is usually limited and may not cover the full replacement cost of specialized Automotive parts. Freight experts recommend insuring based on replacement value, documenting serial numbers and condition at pickup, and retaining invoices and packing lists so any claim for loss, impact damage, or moisture-related failure Can be processed efficiently.

To reduce damage in mixed Automotive pallet loads, arrange the heaviest metal components at the bottom, with lighter boxes and vehicle tires above. Use edge protectors, Stretch wrap plus strapping to stabilize the load and prevent shifting. Keep moisture-sensitive vehicle parts toward the center of the pallet, away from potential leaks or condensation on trailer walls, and Clearly label any fragile or orientation-sensitive cartons so handlers Can follow correct handling procedures.

The documentation required typically includes a bill of lading, commercial invoice, packing list, and any necessary export permits from Vietnam. Additionally, customs documentation for importation into the United States must be prepared, including an entry manifest and any specific declarations related to automotive parts.

Regulatory requirements include compliance with U.S. customs regulations, which may involve inspections and adherence to safety standards for automotive parts. It's essential to ensure that all automotive components meet the environmental and safety regulations set by the U.S. Department of Transportation and the Environmental Protection Agency.

SAMMIE helps reduce tracking time by providing real-time updates, proactive alerts, and a single dashboard, which has led customers to reduce tracking time from 25–30 hours per week to 2–3 hours per week and achieve about 50% less time spent tracking shipments.

SAMMIE impacts cross-department visibility by providing immediate visibility across departments and to your clients, which supports better alignment between purchasing, logistics, and finance.

SAMMIE’s Document Intelligence can auto-tag and organize bills of lading, customs forms, and invoices so you no longer need to hunt through folders or inboxes.