Shipping Tires from Ho Chi Minh City to Columbus via Ocean Freight

For moisture-sensitive automotive parts, choose inner Moisture-barrier bags around each component, then place them in reinforced packaging with sufficient cushioning. Seal all seams with Water-resistant tape and clearly mark cartons “Keep Dry”. For export or long-duration transit, assess adding moisture absorbers inside master cartons and, if needed, inside the shipping container.

You may ship car tires with boxed Auto parts, but they must be physically separated and properly secured. We recommend palletizing boxed Vehicle components and then stacking or racking vehicle tires so they do not press against or rub cartons. Avoid placing heavy loose vehicle tires on top of fragile or moisture-sensitive auto components, as this can cause crushing or punctures during transit.

Fluid-filled automotive parts such as fuel system components, shock absorbers, or oil coolers can require Hazardous materials declarations, depending on the type and quantity of fluid. Exporters should Check whether the product is classified as dangerous goods under DOT and IATA regulations and prepare the appropriate safety data sheets (SDS), UN numbers, and packing group information if applicable. Even when not regulated as hazardous, clearly note “Contains Fluids – Keep Upright” on packaging and shipping documents to guide carriers.

High-value auto components such as engines, transmissions, ECUs, and safety modules are typically shipped with Full-value cargo insurance. Carrier default liability tends to be limited and may not cover the full replacement cost of specialized Automotive parts. We recommend insuring based on replacement value, documenting serial numbers and condition at pickup, and retaining invoices and packing lists so any claim for loss, impact damage, or moisture-related failure will be processed efficiently.

To reduce damage in mixed auto parts pallet loads, arrange the heaviest metal components at the bottom, with lighter boxes and Tires above. Use angle boards, Stretch wrap plus strapping to stabilize the load and prevent shifting. Keep moisture-sensitive Car parts toward the center of the pallet, away from potential leaks or condensation on trailer walls, and visibly tag any fragile or orientation-sensitive cartons so handlers can respect correct handling procedures.

When shipping auto parts, it is important to ensure that items are securely packaged to prevent damage during transit. Additionally, proper labeling and handling instructions should be included to facilitate safe unloading at the destination port. Special care may be required for sensitive components that could be affected by moisture or temperature changes during ocean transport.

Shipments of auto parts from Ho Chi Minh City to Columbus must comply with U.S. Customs and Border Protection regulations. This includes providing a commercial invoice, packing list, and any necessary certificates of origin or compliance with safety standards. Importers should also be aware of tariffs and duties applicable to automotive parts to ensure compliance upon arrival in the U.S.

For us, it means we serve people, not just packages, focusing on face-to-face communication, thoughtful support, and long-term trust rather than one-off transactions.

Prospective clients can take the “One Test Run Challenge” by giving us a single shipment, which we use to demonstrate what visibility, reliability, and real partnership feel like, with a dedicated page available to get started.

Our SAMMIE platform is provided with every ocean, air, land, and customs service at no extra cost.