Shipping Car Tires from Hong Kong to Charlotte via Ocean Freight

For moisture-sensitive Auto parts, select inner poly bags with desiccant around each component, then place them in Sturdy cartons with sufficient cushioning. Seal all seams with strong packing tape and clearly mark cartons “Dry Storage Only”. For export or long-duration transit, Consider adding Desiccant packs inside master cartons and, if needed, inside the shipping container.

You Can ship vehicle tires with boxed automotive parts, but They should be physically separated and properly secured. Logistics providers commonly recommend palletizing boxed car parts and then stacking or racking Tires so they do not press against or rub cartons. Avoid placing heavy loose Tires on top of fragile or moisture-sensitive vehicle parts, as this can cause crushing or punctures during transit.

Fluid-filled Auto parts such as fuel system components, shock absorbers, or oil coolers often require dangerous goods documentation, depending on the type and quantity of fluid. You should verify whether the product is classified as dangerous goods under relevant transport regulations and Provide the appropriate safety data sheets (SDS), UN numbers, and packing group information if applicable. Even when not regulated as hazardous, clearly Indicate “Contains Fluids – Keep Upright” on packaging and shipping documents to guide carriers.

High-value Car parts such as engines, transmissions, ECUs, and safety modules should be shipped with declared value coverage. Carrier default liability Is often limited and may not cover the full replacement cost of specialized vehicle parts. Freight experts recommend insuring based on replacement value, documenting serial numbers and condition at pickup, and retaining invoices and packing lists so any claim for loss, impact damage, or moisture-related failure Can be processed efficiently.

To reduce damage in mixed Automotive pallet loads, position the heaviest metal components at the bottom, with lighter boxes and car tires above. Use Corner boards, shrink wrap and bands to stabilize the load and prevent shifting. Keep moisture-sensitive vehicle parts toward the center of the pallet, away from potential leaks or condensation on trailer walls, and Clearly label any fragile or orientation-sensitive cartons so handlers Can follow correct handling procedures.

The required documentation typically includes a commercial invoice, packing list, bill of lading, and any necessary certificates of origin or compliance with U.S. regulations for automotive parts.

Yes, automotive parts must comply with U.S. Department of Transportation (DOT) and Environmental Protection Agency (EPA) regulations, including any necessary safety standards and emissions certifications.

Yes, we are fully licensed (FMC #019344), bonded, insured, and C-TPAT compliant, with a digital-first customs process that uses automation to reduce delays, cut risk, and ensure regulatory compliance.

Yes, you will have a dedicated Client Success Officer who oversees your freight, solves problems proactively, and keeps you informed throughout each shipment.

We say this because a single shipment is enough for shippers to experience our AI-powered visibility, proactive issue management, and partner-level support, and to see how we differ from larger, less responsive forwarders.