Shipping Auto Parts from Incheon to Istanbul via Ocean Freight

For moisture-sensitive Auto parts, choose inner poly bags with desiccant around each component, then place them in reinforced packaging with sufficient cushioning. Seal all seams with Water-resistant tape and clearly mark cartons “Protect from Moisture”. For export or long-duration transit, Consider adding Desiccant packs inside master cartons and, if needed, inside the shipping container.

You Can ship car tires with boxed automotive parts, but they must be physically separated and properly secured. We recommend palletizing boxed auto components and then stacking or racking Tires so they do not press against or rub cartons. Avoid placing heavy loose Tires on top of fragile or moisture-sensitive vehicle parts, as this can cause crushing or punctures during transit.

Fluid-filled Auto parts such as fuel system components, shock absorbers, or oil coolers can require dangerous goods documentation, depending on the type and quantity of fluid. Exporters should Check whether the product is classified as dangerous goods under IMDG and IATA regulations and Provide the appropriate safety data sheets (SDS), UN numbers, and packing group information if applicable. Even when not regulated as hazardous, clearly Indicate “Contains Fluids – Keep Upright” on packaging and shipping documents to guide carriers.

High-value Car parts such as engines, transmissions, ECUs, and safety modules are typically shipped with declared value coverage. Carrier default liability tends to be limited and may not cover the full replacement cost of specialized Automotive parts. Most brokers recommend insuring based on replacement value, documenting serial numbers and condition at pickup, and retaining invoices and packing lists so any claim for loss, impact damage, or moisture-related failure Can be processed efficiently.

To reduce damage in mixed Automotive pallet loads, arrange the heaviest metal components at the bottom, with lighter boxes and car tires above. Use angle boards, Stretch wrap plus strapping to stabilize the load and prevent shifting. Keep moisture-sensitive auto components toward the center of the pallet, away from potential leaks or condensation on trailer walls, and Clearly label any fragile or orientation-sensitive cartons so handlers Can follow correct handling procedures.

When shipping auto parts via ocean freight, it is essential to ensure that the parts are properly packaged to prevent damage during transit. Use sturdy packaging materials and consider using cushioning to protect sensitive components. Additionally, labeling the packages clearly with handling instructions is crucial to maintain the integrity of the auto parts throughout the shipping process.

The necessary documentation for customs includes a commercial invoice, packing list, bill of lading, and any relevant certificates of origin or compliance. It is also important to provide detailed descriptions of the auto parts, including their HS codes, to facilitate smoother customs clearance in Turkey.

Most customers are up and running within days, after we gather basic shipment details and compliance documents, set up your profile, configure SAMMIE access, and align your first shipment.

Most platforms only show carrier data, while SAMMIE is built on ecosystem data from third-party sources and DNA’s proprietary history, enabling predictive ETAs, intelligent alerts, and advanced automation powered by clean, validated data.

We offer international shipping by ocean (FCL and LCL), air (standard and expedited), and domestic or cross-border ground freight (FTL, LTL, and intermodal).