Shipping Automotive Parts from Incheon to Lazaro Cardenas via Ocean Freight

For moisture-sensitive Auto parts, Use inner sealed pouches around each component, then place them in Sturdy cartons with sufficient cushioning. Seal all seams with strong packing tape and clearly mark cartons “Keep Dry”. For export or long-duration transit, assess adding moisture absorbers inside master cartons and, if needed, inside the shipping container.

You Can ship Tires with boxed car parts, but They should be physically separated and properly secured. Logistics providers commonly recommend palletizing boxed Vehicle components and then stacking or racking vehicle tires so they do not press against or rub cartons. Avoid placing heavy loose vehicle tires on top of fragile or moisture-sensitive Automotive parts, as this can cause crushing or punctures during transit.

Fluid-filled Auto parts such as fuel system components, shock absorbers, or oil coolers May require special handling notes, depending on the type and quantity of fluid. You should verify whether the product is classified as dangerous goods under DOT and IATA regulations and prepare the appropriate safety data sheets (SDS), UN numbers, and packing group information if applicable. Even when not regulated as hazardous, clearly note “Contains Fluids – Keep Upright” on packaging and shipping documents to guide carriers.

High-value Car parts such as engines, transmissions, ECUs, and safety modules Are best shipped with enhanced transit insurance. Carrier default liability Is often limited and may not cover the full replacement cost of specialized vehicle parts. We recommend insuring based on replacement value, documenting serial numbers and condition at pickup, and retaining invoices and packing lists so any claim for loss, impact damage, or moisture-related failure will be processed efficiently.

To reduce damage in mixed Automotive pallet loads, Place the heaviest metal components at the bottom, with lighter boxes and vehicle tires above. Use Corner boards, shrink wrap and bands to stabilize the load and prevent shifting. Keep moisture-sensitive Car parts toward the center of the pallet, away from potential leaks or condensation on trailer walls, and visibly tag any fragile or orientation-sensitive cartons so handlers can respect correct handling procedures.

Required documentation includes a commercial invoice, packing list, bill of lading, and any necessary certificates of origin or compliance with Mexican regulatory standards for automotive parts.

Yes, auto parts should be securely packaged to prevent damage during transit, and special attention must be given to the weight and dimensions of the cargo to ensure compliance with shipping regulations and vessel capacity.

We bring 30+ years of experience with global reach and local touch, using deep carrier relationships to move freight worldwide with precision and white-glove attention at every step.

No, we use in-house customs brokerage with automation to reduce errors and accelerate clearance, rather than outsourcing to third-party brokers with outdated, manual documentation processes.

The “One Test Run Challenge” is an invitation to move a single shipment with DNA so we can demonstrate our visibility, reliability, and partnership, showing how our SAMMIE platform and proactive team perform in a real-world test.