Shipping Vehicle Parts from Incheon to New York via Ocean Freight

For moisture-sensitive Auto parts, select inner sealed pouches around each component, then place them in double-wall boxes with sufficient cushioning. Seal all seams with strong packing tape and clearly mark cartons “Keep Dry”. For export or long-duration transit, assess adding humidity control packs inside master cartons and, if needed, inside the shipping container.

You Can ship vehicle tires with boxed car parts, but it is best that they are physically separated and properly secured. Logistics providers commonly recommend palletizing boxed Vehicle components and then stacking or racking vehicle tires so they do not press against or rub cartons. Avoid placing heavy loose car tires on top of fragile or moisture-sensitive auto components, as this can cause crushing or punctures during transit.

Fluid-filled Auto parts such as fuel system components, shock absorbers, or oil coolers often require special handling notes, depending on the type and quantity of fluid. Shippers should verify whether the product is classified as dangerous goods under DOT and IATA regulations and prepare the appropriate safety data sheets (SDS), UN numbers, and packing group information if applicable. Even when not regulated as hazardous, clearly mark “Contains Fluids – Keep Upright” on packaging and shipping documents to guide carriers.

High-value Car parts such as engines, transmissions, ECUs, and safety modules should be shipped with enhanced transit insurance. Carrier default liability is usually limited and may not cover the full replacement cost of specialized vehicle parts. We recommend insuring based on replacement value, documenting serial numbers and condition at pickup, and retaining invoices and packing lists so any claim for loss, impact damage, or moisture-related failure will be processed efficiently.

To reduce damage in mixed Automotive pallet loads, position the heaviest metal components at the bottom, with lighter boxes and vehicle tires above. Use edge protectors, shrink wrap and bands to stabilize the load and prevent shifting. Keep moisture-sensitive Car parts toward the center of the pallet, away from potential leaks or condensation on trailer walls, and visibly tag any fragile or orientation-sensitive cartons so handlers will follow correct handling procedures.

Auto parts should be securely packaged to prevent damage during transit. It's important to consider weight distribution and use appropriate cushioning materials. Additionally, ensuring that all parts are compliant with international shipping regulations and properly labeled is crucial.

Shipments of auto parts must comply with U.S. Customs and Border Protection regulations, including filing accurate documentation such as the bill of lading and commercial invoice. Importers must also ensure that all parts meet U.S. safety and environmental standards, which may include compliance with the National Highway Traffic Safety Administration (NHTSA) regulations.

Yes, we can full port-to-door service, managing booking, loading, customs clearance, and final-mile delivery with one point of contact and one visibility platform.

Yes, they are. You can see our certifications and compliance credentials, including FMC license, DOT number, and C-TPAT partnership, in the Certifications section of our FAQs.

If something looks off, our team responds quickly, and SAMMIE also flags duplicates or anomalies before invoices are sent, with your dedicated Client Success Officer available for clarification.