Shipping Auto Parts from Istanbul to Long Beach via Ocean Freight

For moisture-sensitive Auto parts, select inner sealed pouches around each component, then place them in reinforced packaging with sufficient cushioning. Seal all seams with filament tape and clearly mark cartons “Keep Dry”. For export or long-duration transit, Consider adding Desiccant packs inside master cartons and, if needed, inside the shipping container.

You Can ship vehicle tires with boxed car parts, but they must be physically separated and properly secured. Most carriers recommend palletizing boxed Vehicle components and then stacking or racking Tires so they do not press against or rub cartons. Avoid placing heavy loose Tires on top of fragile or moisture-sensitive Automotive parts, as this can cause crushing or punctures during transit.

Fluid-filled Auto parts such as fuel system components, shock absorbers, or oil coolers often require special handling notes, depending on the type and quantity of fluid. Exporters should review whether the product is classified as dangerous goods under DOT and IATA regulations and Provide the appropriate safety data sheets (SDS), UN numbers, and packing group information if applicable. Even when not regulated as hazardous, clearly Indicate “Contains Fluids – Keep Upright” on packaging and shipping documents to guide carriers.

High-value Car parts such as engines, transmissions, ECUs, and safety modules should be shipped with enhanced transit insurance. Carrier default liability tends to be limited and may not cover the full replacement cost of specialized auto parts. We recommend insuring based on replacement value, documenting serial numbers and condition at pickup, and retaining invoices and packing lists so any claim for loss, impact damage, or moisture-related failure Can be processed efficiently.

To reduce damage in mixed Automotive pallet loads, position the heaviest metal components at the bottom, with lighter boxes and vehicle tires above. Use angle boards, banding and film wrap to stabilize the load and prevent shifting. Keep moisture-sensitive Car parts toward the center of the pallet, away from potential leaks or condensation on trailer walls, and Clearly label any fragile or orientation-sensitive cartons so handlers Can follow correct handling procedures.

Required documentation includes a commercial invoice, packing list, bill of lading, and any necessary export permits from Turkey. Import documentation for the United States may include a customs entry form and proof of compliance with U.S. regulations for automotive parts.

Seasonal considerations may include increased shipping traffic during peak import seasons, such as spring and summer, which could affect port congestion and handling times at both Istanbul and Long Beach. Additionally, weather conditions can impact ocean freight operations.

We support compliance with U.S. Customs & Border Protection (CBP), the FDA, USDA, DOT, and other regulatory bodies, and we maintain active certifications including C-TPAT and FMC.

Yes, support is available for urgent cases, which are escalated and managed with after-hours monitoring when needed, especially for high-volume or time-critical shipments.

We follow industry best practices and relevant data protection regulations for international shipping and technology platforms, including GDPR and CCPA where applicable.