Shipping Automotive Parts from Istanbul to Mira Loma via Ocean Freight

For moisture-sensitive car parts, Use inner sealed pouches around each component, then place them in double-wall boxes with sufficient cushioning. Seal all seams with Water-resistant tape and clearly mark cartons “Protect from Moisture”. For export or long-duration transit, evaluate adding Desiccant packs inside master cartons and, if needed, inside the shipping container.

You are allowed to ship Tires with boxed car parts, but it is best that they are physically separated and properly secured. We recommend palletizing boxed auto components and then stacking or racking car tires so they do not press against or rub cartons. Avoid placing heavy loose Tires on top of fragile or moisture-sensitive auto components, as this can cause crushing or punctures during transit.

Fluid-filled vehicle parts such as fuel system components, shock absorbers, or oil coolers May require special handling notes, depending on the type and quantity of fluid. Shippers should Check whether the product is classified as dangerous goods under IMDG and IATA regulations and include the appropriate safety data sheets (SDS), UN numbers, and packing group information if applicable. Even when not regulated as hazardous, clearly Indicate “Contains Fluids – Keep Upright” on packaging and shipping documents to guide carriers.

High-value vehicle components such as engines, transmissions, ECUs, and safety modules Are best shipped with enhanced transit insurance. Carrier default liability is usually limited and may not cover the full replacement cost of specialized Automotive parts. Most brokers recommend insuring based on replacement value, documenting serial numbers and condition at pickup, and retaining invoices and packing lists so any claim for loss, impact damage, or moisture-related failure is processed efficiently.

To reduce damage in mixed vehicle components pallet loads, Place the heaviest metal components at the bottom, with lighter boxes and vehicle tires above. Use edge protectors, Stretch wrap plus strapping to stabilize the load and prevent shifting. Keep moisture-sensitive auto components toward the center of the pallet, away from potential leaks or condensation on trailer walls, and prominently mark any fragile or orientation-sensitive cartons so handlers Can follow correct handling procedures.

The required documentation for shipping auto parts includes a commercial invoice, packing list, bill of lading, and any necessary certificates of origin or compliance with U.S. regulations.

Yes, auto parts must comply with U.S. safety and environmental regulations, including compliance with the Federal Motor Vehicle Safety Standards (FMVSS) and any applicable customs duties or tariffs.

We made SAMMIE user-friendly by shaping its interface to look and function like a spreadsheet, with live alerts, exception flags, and a smart dashboard for clarity and action.

Shippers can anticipate a great client experience built on constant visibility, attention to detail, smart technology, data mastery, and a genuine connection with our team.

We mean that we take our responsibility seriously because people are counting on reliable global logistics, and we align our values, technology, and relationships to deliver on that responsibility.