Shipping Vehicle Parts from Istanbul to Vancouver via Ocean Freight

For moisture-sensitive automotive parts, Use inner Moisture-barrier bags around each component, then place them in double-wall boxes with sufficient cushioning. Seal all seams with Water-resistant tape and clearly mark cartons “Dry Storage Only”. For export or long-duration transit, evaluate adding humidity control packs inside master cartons and, if needed, inside the shipping container.

You may ship Tires with boxed Auto parts, but it is best that they are physically separated and properly secured. We recommend palletizing boxed car parts and then stacking or racking car tires so they do not press against or rub cartons. Avoid placing heavy loose car tires on top of fragile or moisture-sensitive vehicle parts, as this can cause crushing or punctures during transit.

Fluid-filled automotive parts such as fuel system components, shock absorbers, or oil coolers May require Hazardous materials declarations, depending on the type and quantity of fluid. Shippers should Check whether the product is classified as dangerous goods under relevant transport regulations and include the appropriate safety data sheets (SDS), UN numbers, and packing group information if applicable. Even when not regulated as hazardous, clearly mark “Contains Fluids – Keep Upright” on packaging and shipping documents to guide carriers.

High-value auto components such as engines, transmissions, ECUs, and safety modules Are best shipped with Full-value cargo insurance. Carrier default liability is usually limited and may not cover the full replacement cost of specialized Automotive parts. Freight experts recommend insuring based on replacement value, documenting serial numbers and condition at pickup, and retaining invoices and packing lists so any claim for loss, impact damage, or moisture-related failure is processed efficiently.

To reduce damage in mixed auto parts pallet loads, Place the heaviest metal components at the bottom, with lighter boxes and Tires above. Use edge protectors, Stretch wrap plus strapping to stabilize the load and prevent shifting. Keep moisture-sensitive vehicle parts toward the center of the pallet, away from potential leaks or condensation on trailer walls, and prominently mark any fragile or orientation-sensitive cartons so handlers will follow correct handling procedures.

The required documentation includes a commercial invoice, packing list, bill of lading, and any necessary certificates of origin or compliance related to automotive parts.

Yes, auto parts must comply with Canadian import regulations, which may include meeting specific safety and environmental standards, as well as proper tariff classification for customs clearance.

DNA addresses risk and delays by using SAMMIE as a mission-critical platform with live data, predictive alerts, and exception management so importers can manage risk, reduce delays, and reclaim control.

Our platform provides smart, preemptive alerts about delays, reroutes, or exceptions so you are notified before you even ask.

Yes, DNA provides port-to-door service that covers customs and final-mile delivery.