Shipping Car Tires from Izmir to Los Angeles via Ocean Freight

For moisture-sensitive Auto parts, Use inner Moisture-barrier bags around each component, then place them in double-wall boxes with sufficient cushioning. Seal all seams with strong packing tape and clearly mark cartons “Keep Dry”. For export or long-duration transit, Consider adding Desiccant packs inside master cartons and, if needed, inside the shipping container.

You Can ship Tires with boxed Auto parts, but it is best that they are physically separated and properly secured. Logistics providers commonly recommend palletizing boxed Vehicle components and then stacking or racking Tires so they do not press against or rub cartons. Avoid placing heavy loose Tires on top of fragile or moisture-sensitive auto components, as this can cause crushing or punctures during transit.

Fluid-filled Auto parts such as fuel system components, shock absorbers, or oil coolers May require Hazardous materials declarations, depending on the type and quantity of fluid. Shippers should verify whether the product is classified as dangerous goods under DOT and IATA regulations and Provide the appropriate safety data sheets (SDS), UN numbers, and packing group information if applicable. Even when not regulated as hazardous, clearly Indicate “Contains Fluids – Keep Upright” on packaging and shipping documents to guide carriers.

High-value Car parts such as engines, transmissions, ECUs, and safety modules Are best shipped with Full-value cargo insurance. Carrier default liability is usually limited and may not cover the full replacement cost of specialized vehicle parts. We recommend insuring based on replacement value, documenting serial numbers and condition at pickup, and retaining invoices and packing lists so any claim for loss, impact damage, or moisture-related failure Can be processed efficiently.

To reduce damage in mixed Automotive pallet loads, Place the heaviest metal components at the bottom, with lighter boxes and Tires above. Use edge protectors, shrink wrap and bands to stabilize the load and prevent shifting. Keep moisture-sensitive Car parts toward the center of the pallet, away from potential leaks or condensation on trailer walls, and Clearly label any fragile or orientation-sensitive cartons so handlers Can follow correct handling procedures.

Required documentation includes a commercial invoice, packing list, bill of lading, and any necessary certificates of origin or compliance with U.S. regulations for automotive parts.

Yes, auto parts must comply with U.S. Customs and Border Protection regulations, including adherence to safety and environmental standards set by the Environmental Protection Agency (EPA) and the Department of Transportation (DOT).

It means we serve people, not just packages, focusing on face-to-face communication, thoughtful support, and long-term trust rather than one-off transactions.

You can take the “One Test Run Challenge” by giving us a single shipment, which we use to demonstrate what visibility, reliability, and real partnership feel like, with a dedicated page available to get started.

SAMMIE is included with every ocean, air, land, and customs service at no extra cost.