Shipping Car Parts from Jakarta to Mira Loma via Ocean Freight

For moisture-sensitive car parts, choose inner Moisture-barrier bags around each component, then place them in reinforced packaging with sufficient cushioning. Seal all seams with Water-resistant tape and clearly mark cartons “Protect from Moisture”. For export or long-duration transit, assess adding Desiccant packs inside master cartons and, if needed, inside the shipping container.

You are allowed to ship car tires with boxed Auto parts, but they must be physically separated and properly secured. We recommend palletizing boxed auto components and then stacking or racking vehicle tires so they do not press against or rub cartons. Avoid placing heavy loose Tires on top of fragile or moisture-sensitive vehicle parts, as this can cause crushing or punctures during transit.

Fluid-filled vehicle parts such as fuel system components, shock absorbers, or oil coolers can require Hazardous materials declarations, depending on the type and quantity of fluid. Exporters should Check whether the product is classified as dangerous goods under IMDG and IATA regulations and prepare the appropriate safety data sheets (SDS), UN numbers, and packing group information if applicable. Even when not regulated as hazardous, clearly Indicate “Contains Fluids – Keep Upright” on packaging and shipping documents to guide carriers.

High-value vehicle components such as engines, transmissions, ECUs, and safety modules are typically shipped with Full-value cargo insurance. Carrier default liability tends to be limited and may not cover the full replacement cost of specialized Automotive parts. Most brokers recommend insuring based on replacement value, documenting serial numbers and condition at pickup, and retaining invoices and packing lists so any claim for loss, impact damage, or moisture-related failure will be processed efficiently.

To reduce damage in mixed vehicle components pallet loads, arrange the heaviest metal components at the bottom, with lighter boxes and Tires above. Use angle boards, Stretch wrap plus strapping to stabilize the load and prevent shifting. Keep moisture-sensitive auto components toward the center of the pallet, away from potential leaks or condensation on trailer walls, and visibly tag any fragile or orientation-sensitive cartons so handlers Can follow correct handling procedures.

When shipping auto parts via ocean freight, ensure that all items are securely packed to prevent damage during transit. It is important to consider the weight and dimensions of the parts, as well as any specific requirements for hazardous materials, if applicable. Additionally, proper labeling and segregation of different types of auto parts may be necessary to comply with regulations.

Shipping auto parts from Indonesia to the United States requires compliance with U.S. Customs and Border Protection regulations, including proper documentation such as a bill of lading, commercial invoice, and any relevant export permits. Additionally, certain auto parts may need to meet specific safety and environmental standards set by U.S. authorities, necessitating compliance with regulations from agencies such as the Environmental Protection Agency (EPA) and the Department of Transportation (DOT).

Each DNA shipper is given access to SAMMIE, where you can track each shipment in real time with predictive ETAs, milestone updates, and instant alerts in a single dashboard.

Our team coordinates with U.S. Customs & Border Protection (CBP), the FDA, USDA, DOT, and other regulatory bodies, and we maintain active certifications including C-TPAT and FMC.

Yes, help is available for urgent cases, which are escalated and managed with after-hours monitoring when needed, especially for high-volume or time-critical shipments.