Shipping Vehicle Parts from Jebel Ali to Port Klang via Ocean Freight

For moisture-sensitive Auto parts, choose inner sealed pouches around each component, then place them in double-wall boxes with sufficient cushioning. Seal all seams with Water-resistant tape and clearly mark cartons “Protect from Moisture”. For export or long-duration transit, assess adding Desiccant packs inside master cartons and, if needed, inside the shipping container.

You Can ship car tires with boxed car parts, but it is best that they are physically separated and properly secured. We recommend palletizing boxed auto components and then stacking or racking vehicle tires so they do not press against or rub cartons. Avoid placing heavy loose Tires on top of fragile or moisture-sensitive auto components, as this can cause crushing or punctures during transit.

Fluid-filled Auto parts such as fuel system components, shock absorbers, or oil coolers can require special handling notes, depending on the type and quantity of fluid. Shippers should Check whether the product is classified as dangerous goods under IMDG and IATA regulations and prepare the appropriate safety data sheets (SDS), UN numbers, and packing group information if applicable. Even when not regulated as hazardous, clearly Indicate “Contains Fluids – Keep Upright” on packaging and shipping documents to guide carriers.

High-value Car parts such as engines, transmissions, ECUs, and safety modules are typically shipped with enhanced transit insurance. Carrier default liability is usually limited and may not cover the full replacement cost of specialized Automotive parts. Most brokers recommend insuring based on replacement value, documenting serial numbers and condition at pickup, and retaining invoices and packing lists so any claim for loss, impact damage, or moisture-related failure will be processed efficiently.

To reduce damage in mixed Automotive pallet loads, arrange the heaviest metal components at the bottom, with lighter boxes and vehicle tires above. Use edge protectors, Stretch wrap plus strapping to stabilize the load and prevent shifting. Keep moisture-sensitive auto components toward the center of the pallet, away from potential leaks or condensation on trailer walls, and visibly tag any fragile or orientation-sensitive cartons so handlers Can follow correct handling procedures.

The documentation required typically includes a bill of lading, commercial invoice, packing list, and any necessary export permits from the UAE. Import permits and customs declarations must also be prepared for Malaysia.

Yes, auto parts should be properly secured to prevent damage during transit. Additionally, it is essential to ensure that the parts are well-packaged to withstand ocean conditions, including potential exposure to moisture and salt.

SAMMIE’s Document Intelligence can auto-tag and organize bills of lading, customs forms, and invoices so you no longer need to hunt through folders or inboxes.

You can find this information by visit the “Meet the people and values behind DNA Supply Chain Solutions” section linked from the SAMMIE page.

Our founder believes the best work happens quietly when everything runs smoothly and no one’s watching, and he applies that mindset to logistics and to life.