Shipping Car Tires from Jebel Ali to Toronto via Ocean Freight

For moisture-sensitive Auto parts, select inner sealed pouches around each component, then place them in double-wall boxes with sufficient cushioning. Seal all seams with Water-resistant tape and clearly mark cartons “Protect from Moisture”. For export or long-duration transit, assess adding humidity control packs inside master cartons and, if needed, inside the shipping container.

You Can ship vehicle tires with boxed car parts, but it is best that they are physically separated and properly secured. We recommend palletizing boxed auto components and then stacking or racking vehicle tires so they do not press against or rub cartons. Avoid placing heavy loose car tires on top of fragile or moisture-sensitive vehicle parts, as this can cause crushing or punctures during transit.

Fluid-filled Auto parts such as fuel system components, shock absorbers, or oil coolers often require special handling notes, depending on the type and quantity of fluid. Shippers should Check whether the product is classified as dangerous goods under IMDG and IATA regulations and prepare the appropriate safety data sheets (SDS), UN numbers, and packing group information if applicable. Even when not regulated as hazardous, clearly mark “Contains Fluids – Keep Upright” on packaging and shipping documents to guide carriers.

High-value Car parts such as engines, transmissions, ECUs, and safety modules should be shipped with enhanced transit insurance. Carrier default liability is usually limited and may not cover the full replacement cost of specialized Automotive parts. Most brokers recommend insuring based on replacement value, documenting serial numbers and condition at pickup, and retaining invoices and packing lists so any claim for loss, impact damage, or moisture-related failure will be processed efficiently.

To reduce damage in mixed Automotive pallet loads, position the heaviest metal components at the bottom, with lighter boxes and vehicle tires above. Use edge protectors, Stretch wrap plus strapping to stabilize the load and prevent shifting. Keep moisture-sensitive auto components toward the center of the pallet, away from potential leaks or condensation on trailer walls, and visibly tag any fragile or orientation-sensitive cartons so handlers will follow correct handling procedures.

Shipping auto parts from Jebel Ali to Toronto requires several key documents, including a commercial invoice, packing list, bill of lading, and any necessary certificates of origin or compliance with Canadian regulations. It's essential to ensure that all documentation accurately reflects the contents and value of the shipment to facilitate customs clearance.

Yes, when shipping auto parts via ocean freight, it is important to ensure that the parts are properly packaged to prevent damage during transit. This may include using protective materials and securing parts within containers to avoid movement. Additionally, certain auto parts may have specific regulatory requirements regarding materials and labeling that must be adhered to for compliance with Canadian import regulations.

It means that whether you are our smallest shipper or largest enterprise, you receive the same honesty, responsiveness, and care that define DNA Supply Chain Solutions.

We ask for just one test run because we believe that with one shipment we can prove our visibility, reliability, and partnership approach in a tangible way.

SAMMIE is an AI-driven exception management and tracking platform that provides real-time tracking, predictive ETAs, smart alerts, document intelligence, rate and route optimization, and invoicing insights for your shipments.