Shipping Auto Parts from Jiangmen to Bogota via Ocean Freight

For moisture-sensitive Auto parts, choose inner poly bags with desiccant around each component, then place them in reinforced packaging with sufficient cushioning. Seal all seams with filament tape and clearly mark cartons “Keep Dry”. For export or long-duration transit, Consider adding Desiccant packs inside master cartons and, if needed, inside the shipping container.

You Can ship car tires with boxed automotive parts, but they must be physically separated and properly secured. Most carriers recommend palletizing boxed Vehicle components and then stacking or racking Tires so they do not press against or rub cartons. Avoid placing heavy loose Tires on top of fragile or moisture-sensitive vehicle parts, as this can cause crushing or punctures during transit.

Fluid-filled Auto parts such as fuel system components, shock absorbers, or oil coolers can require dangerous goods documentation, depending on the type and quantity of fluid. Exporters should review whether the product is classified as dangerous goods under DOT and IATA regulations and Provide the appropriate safety data sheets (SDS), UN numbers, and packing group information if applicable. Even when not regulated as hazardous, clearly Indicate “Contains Fluids – Keep Upright” on packaging and shipping documents to guide carriers.

High-value Car parts such as engines, transmissions, ECUs, and safety modules are typically shipped with declared value coverage. Carrier default liability tends to be limited and may not cover the full replacement cost of specialized auto parts. We recommend insuring based on replacement value, documenting serial numbers and condition at pickup, and retaining invoices and packing lists so any claim for loss, impact damage, or moisture-related failure Can be processed efficiently.

To reduce damage in mixed Automotive pallet loads, arrange the heaviest metal components at the bottom, with lighter boxes and car tires above. Use angle boards, banding and film wrap to stabilize the load and prevent shifting. Keep moisture-sensitive Car parts toward the center of the pallet, away from potential leaks or condensation on trailer walls, and Clearly label any fragile or orientation-sensitive cartons so handlers Can follow correct handling procedures.

When shipping auto parts via ocean freight, it is essential to ensure that all items are properly packaged to prevent damage during transit. Fragile components should be cushioned, and heavier parts should be secured to avoid shifting. Additionally, compliance with international shipping regulations regarding hazardous materials must be checked, as some automotive parts may contain substances that require special handling.

Importing auto parts into Colombia from China requires adherence to specific customs documentation, including a commercial invoice, packing list, and bill of lading. It is also necessary to verify that the auto parts meet Colombian technical standards and certifications, as customs authorities may require proof of compliance to prevent delays during the clearance process.

We provide ground transportation including full truckload (FTL), less-than-truckload (LTL), and drayage services, with U.S. and Mexico cross-border coverage, scalable capacity, GPS tracking, and digital documentation.

Yes, we provide tariff classification and valuation as part of our in-house expertise.

We operate partnered facilities in key logistics hubs, including locations near important ports for strategic storage and fulfillment.