Shipping Automotive Parts from Jiangmen to Kansas City via Ocean Freight

For moisture-sensitive automotive parts, Use inner Moisture-barrier bags around each component, then place them in double-wall boxes with sufficient cushioning. Seal all seams with filament tape and clearly mark cartons “Keep Dry”. For export or long-duration transit, assess adding humidity control packs inside master cartons and, if needed, inside the shipping container.

You may ship Tires with boxed Auto parts, but it is best that they are physically separated and properly secured. Most carriers recommend palletizing boxed Vehicle components and then stacking or racking vehicle tires so they do not press against or rub cartons. Avoid placing heavy loose car tires on top of fragile or moisture-sensitive vehicle parts, as this can cause crushing or punctures during transit.

Fluid-filled automotive parts such as fuel system components, shock absorbers, or oil coolers May require Hazardous materials declarations, depending on the type and quantity of fluid. Shippers should review whether the product is classified as dangerous goods under DOT and IATA regulations and prepare the appropriate safety data sheets (SDS), UN numbers, and packing group information if applicable. Even when not regulated as hazardous, clearly mark “Contains Fluids – Keep Upright” on packaging and shipping documents to guide carriers.

High-value auto components such as engines, transmissions, ECUs, and safety modules Are best shipped with Full-value cargo insurance. Carrier default liability is usually limited and may not cover the full replacement cost of specialized auto parts. We recommend insuring based on replacement value, documenting serial numbers and condition at pickup, and retaining invoices and packing lists so any claim for loss, impact damage, or moisture-related failure will be processed efficiently.

To reduce damage in mixed auto parts pallet loads, Place the heaviest metal components at the bottom, with lighter boxes and Tires above. Use edge protectors, banding and film wrap to stabilize the load and prevent shifting. Keep moisture-sensitive Car parts toward the center of the pallet, away from potential leaks or condensation on trailer walls, and visibly tag any fragile or orientation-sensitive cartons so handlers will follow correct handling procedures.

Shipping auto parts from Jiangmen to Kansas City requires several key documents, including a commercial invoice, packing list, bill of lading, and any necessary export permits from China. Additionally, customs clearance in the United States will require an entry manifest and may necessitate a customs bond.

Yes, when shipping auto parts via ocean freight, it is important to ensure that the parts are properly packaged to prevent damage during transit. Consideration should also be given to weight distribution and securing cargo within the shipping container to avoid shifting. Proper labeling and compliance with international shipping regulations are essential for smooth handling.

DNA works with U.S. Customs & Border Protection (CBP), the FDA, USDA, DOT, and other regulatory bodies, and we maintain active certifications including C-TPAT and FMC.

Yes, we do provide coverage for urgent cases, which are escalated and managed with after-hours monitoring when needed, especially for high-volume or time-critical shipments.

DNA adheres to industry best practices and relevant data protection regulations for international shipping and technology platforms, including GDPR and CCPA where applicable.