Shipping Car Tires from Kaohsiung to Charlotte via Ocean Freight

For moisture-sensitive Auto parts, select inner poly bags with desiccant around each component, then place them in double-wall boxes with sufficient cushioning. Seal all seams with strong packing tape and clearly mark cartons “Keep Dry”. For export or long-duration transit, Consider adding humidity control packs inside master cartons and, if needed, inside the shipping container.

You Can ship vehicle tires with boxed automotive parts, but it is best that they are physically separated and properly secured. Logistics providers commonly recommend palletizing boxed Vehicle components and then stacking or racking Tires so they do not press against or rub cartons. Avoid placing heavy loose car tires on top of fragile or moisture-sensitive vehicle parts, as this can cause crushing or punctures during transit.

Fluid-filled Auto parts such as fuel system components, shock absorbers, or oil coolers often require dangerous goods documentation, depending on the type and quantity of fluid. Shippers should verify whether the product is classified as dangerous goods under DOT and IATA regulations and Provide the appropriate safety data sheets (SDS), UN numbers, and packing group information if applicable. Even when not regulated as hazardous, clearly mark “Contains Fluids – Keep Upright” on packaging and shipping documents to guide carriers.

High-value Car parts such as engines, transmissions, ECUs, and safety modules should be shipped with declared value coverage. Carrier default liability is usually limited and may not cover the full replacement cost of specialized vehicle parts. We recommend insuring based on replacement value, documenting serial numbers and condition at pickup, and retaining invoices and packing lists so any claim for loss, impact damage, or moisture-related failure Can be processed efficiently.

To reduce damage in mixed Automotive pallet loads, position the heaviest metal components at the bottom, with lighter boxes and car tires above. Use edge protectors, shrink wrap and bands to stabilize the load and prevent shifting. Keep moisture-sensitive Car parts toward the center of the pallet, away from potential leaks or condensation on trailer walls, and Clearly label any fragile or orientation-sensitive cartons so handlers will follow correct handling procedures.

Auto parts should be securely packaged to prevent damage during transit. It is recommended to use moisture-resistant materials, as ocean freight may expose shipments to humidity. Additionally, labeling should clearly indicate the contents and handling instructions to facilitate proper treatment during loading and unloading.

Required documentation includes a commercial invoice, packing list, bill of lading, and any relevant certificates of origin or compliance with U.S. regulations. Importers must also ensure that the auto parts comply with U.S. safety and environmental standards to avoid delays at customs.

Smart Route Planning in SAMMIE uses AI to hunt for the best carrier, lane, and timing in real time, optimizing for cost, speed, and reliability.

SAMMIE supports project-based ocean freight by allows teams to quickly and efficiently update their customers regarding project-based ocean freight shipments and provides the tools needed to deliver the customer service their clients expect.

Customers report that SAMMIE helps them manage shipments much better than previous archaic, time-consuming methods that often relied on inaccurate data, replacing status emails and spreadsheet chaos with real-time clarity.