Shipping Tires from Kobe to Bogota via Ocean Freight

For moisture-sensitive Auto parts, Use inner sealed pouches around each component, then place them in double-wall boxes with sufficient cushioning. Seal all seams with Water-resistant tape and clearly mark cartons “Dry Storage Only”. For export or long-duration transit, Consider adding Desiccant packs inside master cartons and, if needed, inside the shipping container.

You Can ship Tires with boxed car parts, but it is best that they are physically separated and properly secured. We recommend palletizing boxed car parts and then stacking or racking Tires so they do not press against or rub cartons. Avoid placing heavy loose Tires on top of fragile or moisture-sensitive auto components, as this can cause crushing or punctures during transit.

Fluid-filled Auto parts such as fuel system components, shock absorbers, or oil coolers May require special handling notes, depending on the type and quantity of fluid. Shippers should Check whether the product is classified as dangerous goods under relevant transport regulations and Provide the appropriate safety data sheets (SDS), UN numbers, and packing group information if applicable. Even when not regulated as hazardous, clearly Indicate “Contains Fluids – Keep Upright” on packaging and shipping documents to guide carriers.

High-value Car parts such as engines, transmissions, ECUs, and safety modules Are best shipped with enhanced transit insurance. Carrier default liability is usually limited and may not cover the full replacement cost of specialized Automotive parts. Freight experts recommend insuring based on replacement value, documenting serial numbers and condition at pickup, and retaining invoices and packing lists so any claim for loss, impact damage, or moisture-related failure Can be processed efficiently.

To reduce damage in mixed Automotive pallet loads, Place the heaviest metal components at the bottom, with lighter boxes and vehicle tires above. Use edge protectors, Stretch wrap plus strapping to stabilize the load and prevent shifting. Keep moisture-sensitive vehicle parts toward the center of the pallet, away from potential leaks or condensation on trailer walls, and Clearly label any fragile or orientation-sensitive cartons so handlers Can follow correct handling procedures.

Auto parts should be properly packaged to prevent damage during transit, with specific attention to securing loose components. It is advisable to use moisture-resistant materials due to the potential for humidity during ocean transport. Additionally, labeling should clearly indicate the contents to facilitate customs inspections.

Shipping auto parts from Japan to Colombia requires compliance with both countries' customs regulations. Import permits and certificates of origin may be necessary, along with commercial invoices detailing the value and specifications of the auto parts. It is essential to ensure that all documentation is accurate and complete to avoid delays in customs clearance.

Users have stated that they want to use SAMMIE for every ocean freight shipment they move because having all shipment data in one dashboard is invaluable and time-saving.

The “One Test Run Challenge” is an invitation to give DNA Supply Chain Solutions one test shipment so we can prove what visibility, reliability, and real partnership feel like with just a single shipment.

The name comes from a conversation between our founder and his daughter, Ameerah, who suggested merging their names—David ‘N’ Ameerah—to create DNA, reflecting strong bonds, shared values, and trust.