Shipping Auto Parts from Laem Chabang to Mira Loma via Ocean Freight

For moisture-sensitive Auto parts, choose inner poly bags with desiccant around each component, then place them in Sturdy cartons with sufficient cushioning. Seal all seams with Water-resistant tape and clearly mark cartons “Keep Dry”. For export or long-duration transit, Consider adding humidity control packs inside master cartons and, if needed, inside the shipping container.

You Can ship car tires with boxed automotive parts, but They should be physically separated and properly secured. We recommend palletizing boxed Vehicle components and then stacking or racking Tires so they do not press against or rub cartons. Avoid placing heavy loose car tires on top of fragile or moisture-sensitive auto components, as this can cause crushing or punctures during transit.

Fluid-filled Auto parts such as fuel system components, shock absorbers, or oil coolers can require dangerous goods documentation, depending on the type and quantity of fluid. You should Check whether the product is classified as dangerous goods under DOT and IATA regulations and Provide the appropriate safety data sheets (SDS), UN numbers, and packing group information if applicable. Even when not regulated as hazardous, clearly mark “Contains Fluids – Keep Upright” on packaging and shipping documents to guide carriers.

High-value Car parts such as engines, transmissions, ECUs, and safety modules are typically shipped with declared value coverage. Carrier default liability Is often limited and may not cover the full replacement cost of specialized Automotive parts. We recommend insuring based on replacement value, documenting serial numbers and condition at pickup, and retaining invoices and packing lists so any claim for loss, impact damage, or moisture-related failure Can be processed efficiently.

To reduce damage in mixed Automotive pallet loads, arrange the heaviest metal components at the bottom, with lighter boxes and car tires above. Use Corner boards, Stretch wrap plus strapping to stabilize the load and prevent shifting. Keep moisture-sensitive Car parts toward the center of the pallet, away from potential leaks or condensation on trailer walls, and Clearly label any fragile or orientation-sensitive cartons so handlers will follow correct handling procedures.

The documentation required typically includes a bill of lading, commercial invoice, packing list, and any applicable certificates of origin or conformity to comply with U.S. customs regulations.

Yes, imported auto parts must comply with U.S. Department of Transportation (DOT) and Environmental Protection Agency (EPA) regulations, including safety and emissions standards, and may require additional documentation for compliance verification.

What sets SAMMIE apart is its proprietary ecosystem of standardized shipping data that is meticulously cleaned, weighted, and validated from trusted third-party sources and DNA Supply Chain Solutions’ own operational history, enabling AI tools that think ahead instead of just reporting past events.

SAMMIE helps reduce tracking time by providing real-time updates, proactive alerts, and a single dashboard, which has led customers to reduce tracking time from 25–30 hours per week to 2–3 hours per week and achieve about 50% less time spent tracking shipments.

SAMMIE impacts cross-department visibility by providing immediate visibility across departments and to your clients, which supports better alignment between purchasing, logistics, and finance.