Shipping Auto Parts from Lagos to Buenos Aires via Ocean Freight

For moisture-sensitive Auto parts, Use inner sealed pouches around each component, then place them in double-wall boxes with sufficient cushioning. Seal all seams with filament tape and clearly mark cartons “Dry Storage Only”. For export or long-duration transit, Consider adding moisture absorbers inside master cartons and, if needed, inside the shipping container.

You Can ship Tires with boxed car parts, but it is best that they are physically separated and properly secured. Most carriers recommend palletizing boxed car parts and then stacking or racking Tires so they do not press against or rub cartons. Avoid placing heavy loose vehicle tires on top of fragile or moisture-sensitive vehicle parts, as this can cause crushing or punctures during transit.

Fluid-filled Auto parts such as fuel system components, shock absorbers, or oil coolers May require special handling notes, depending on the type and quantity of fluid. Shippers should review whether the product is classified as dangerous goods under relevant transport regulations and Provide the appropriate safety data sheets (SDS), UN numbers, and packing group information if applicable. Even when not regulated as hazardous, clearly note “Contains Fluids – Keep Upright” on packaging and shipping documents to guide carriers.

High-value Car parts such as engines, transmissions, ECUs, and safety modules Are best shipped with enhanced transit insurance. Carrier default liability is usually limited and may not cover the full replacement cost of specialized auto parts. Freight experts recommend insuring based on replacement value, documenting serial numbers and condition at pickup, and retaining invoices and packing lists so any claim for loss, impact damage, or moisture-related failure Can be processed efficiently.

To reduce damage in mixed Automotive pallet loads, Place the heaviest metal components at the bottom, with lighter boxes and vehicle tires above. Use edge protectors, banding and film wrap to stabilize the load and prevent shifting. Keep moisture-sensitive vehicle parts toward the center of the pallet, away from potential leaks or condensation on trailer walls, and Clearly label any fragile or orientation-sensitive cartons so handlers can respect correct handling procedures.

When shipping auto parts, it's important to ensure that items are securely packaged to prevent damage during transit. Additionally, specific handling may be required for sensitive components, such as electronics or hydraulic parts, which should be stored in a climate-controlled environment to avoid exposure to moisture.

Shipping auto parts from Nigeria to Argentina requires compliance with both countries' customs regulations. Export documentation from Nigeria, including a commercial invoice, packing list, and any necessary export permits, must be prepared. In Argentina, import documentation must include an import license, and the auto parts may be subject to specific tariffs and duties. It's essential to check for any additional regulatory requirements or restrictions on automotive parts.

We help manage risk and reduce delays by using SAMMIE as a mission-critical platform with live data, predictive alerts, and exception management so importers can manage risk, reduce delays, and reclaim control.

SAMMIE sends smart, preemptive alerts about delays, reroutes, or exceptions so you are notified before you even ask.

Yes, we offer port-to-door service that covers customs and final-mile delivery.