Shipping Car Tires from Lagos to Los Angeles via Ocean Freight

For moisture-sensitive automotive parts, select inner sealed pouches around each component, then place them in double-wall boxes with sufficient cushioning. Seal all seams with filament tape and clearly mark cartons “Dry Storage Only”. For export or long-duration transit, Consider adding humidity control packs inside master cartons and, if needed, inside the shipping container.

You may ship vehicle tires with boxed car parts, but it is best that they are physically separated and properly secured. Most carriers recommend palletizing boxed car parts and then stacking or racking Tires so they do not press against or rub cartons. Avoid placing heavy loose car tires on top of fragile or moisture-sensitive vehicle parts, as this can cause crushing or punctures during transit.

Fluid-filled automotive parts such as fuel system components, shock absorbers, or oil coolers often require special handling notes, depending on the type and quantity of fluid. Shippers should review whether the product is classified as dangerous goods under relevant transport regulations and Provide the appropriate safety data sheets (SDS), UN numbers, and packing group information if applicable. Even when not regulated as hazardous, clearly mark “Contains Fluids – Keep Upright” on packaging and shipping documents to guide carriers.

High-value auto components such as engines, transmissions, ECUs, and safety modules should be shipped with enhanced transit insurance. Carrier default liability is usually limited and may not cover the full replacement cost of specialized auto parts. Freight experts recommend insuring based on replacement value, documenting serial numbers and condition at pickup, and retaining invoices and packing lists so any claim for loss, impact damage, or moisture-related failure Can be processed efficiently.

To reduce damage in mixed auto parts pallet loads, position the heaviest metal components at the bottom, with lighter boxes and vehicle tires above. Use edge protectors, banding and film wrap to stabilize the load and prevent shifting. Keep moisture-sensitive vehicle parts toward the center of the pallet, away from potential leaks or condensation on trailer walls, and Clearly label any fragile or orientation-sensitive cartons so handlers will follow correct handling procedures.

The documentation required includes a commercial invoice, packing list, bill of lading, and any necessary export permits from Nigeria. Additionally, an import declaration and customs clearance documents are needed upon arrival in Los Angeles.

Yes, auto parts should be securely packaged to withstand ocean conditions, including humidity and saltwater exposure. It's also important to ensure that the parts are properly labeled and comply with any regulatory requirements to facilitate customs clearance at both ports.

Our platform provides smart, preemptive alerts about delays, reroutes, or exceptions so you are notified before you even ask.

Yes, DNA provides port-to-door service that covers customs and final-mile delivery.

Yes, DNA provides U.S. and Mexico cross-border coverage.